Electromen OY DC Motor Controller, 12/24 V dc, 3 A

Bekijk alle Motor Controllers

Subtotaal (1 eenheid)*

€ 152,12

(excl. BTW)

€ 184,07

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 23 stuk(s) klaar voor verzending
  • 28 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 152,12

*prijsindicatie

RS-stocknr.:
510-1215
Fabrikantnummer:
EM185
Fabrikant:
Electromen OY
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Electromen OY

Product Type

DC Motor Controller

Output Voltage

35 V

Supply Voltage

12/24 V dc

Current Rating

3 A

Overall Length

38mm

Overall Width

37mm

Overall Depth

30 mm

Minimum Operating Temperature

0°C

Maximum Operating Temperature

60°C

Standards/Approvals

No

Land van herkomst:
FI

Electromen - EM-185 3A 12-32VDC POTENTIOMETER DRIVE BOARD


The EM-185 is a PWM-based DC-motor driver developed for industrial environment applications. The unit is packaged for very easy panel mounting by means of a Ø10mm through hole.The drive has very low RF emissions and is suitable for use in in critical electromagnetic environments including medical.Motor voltage is regulated against supply voltage changes and also offers load compensation adjustment.Current limit and speed range are adjusted with onboard trim pots.

The power stage of the device is protected against short-circuit and over temperature situations

Features and Benefits


12-24Vdc, 3A continuous, 6A peak

Speed control without loss of torque

Adjustable current limit

Direct mounting to control panel;Smooth PWM speed regulation

Suitable for 5-80W brushed DC motors

Easy direct mounting to panel (Ø10mm hole)

Load compensation

Adjustable current limit

Overload and short-circuit protection

Low RF emissions

Compact size

EM-185 DC Motor Speed Regulator


The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, and there is also a load compensation (RxI) adjustment. Thanks to these features drive offers good performance in motor speed control applications. The current limit and the rpm range are adjustable with trimmer potentiometers. The power stage of the device is protected against short-circuit and overload (over temp.).The drive is easy to mount in a 10mm hole in an assembly panel.

Features & Benefits


1 Quadrant

Panel mountable

Small size

Motor power 5-80W

Load compensation Rxl

Adjustable current limit

EMC tested (CE marked)

Overload and short circuit protected

Gerelateerde Links