Greenwich Instruments 0.02 kW Motor Controller, 24 V, 3 Phase, 2 A
- RS-stocknr.:
- 240-7920
- Fabrikantnummer:
- GSM 2
- Fabrikant:
- Greenwich Instruments
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 240-7920
- Fabrikantnummer:
- GSM 2
- Fabrikant:
- Greenwich Instruments
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Greenwich Instruments | |
| Number of Phases | 3 | |
| Product Type | Motor Controller | |
| Supply Voltage | 24 V | |
| Output Voltage | 5 V | |
| Current Rating | 2 A | |
| Power Rating | 0.02kW | |
| Overall Length | 61mm | |
| Overall Width | 46mm | |
| Overall Depth | 15 mm | |
| Maximum Operating Temperature | 65°C | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Greenwich Instruments | ||
Number of Phases 3 | ||
Product Type Motor Controller | ||
Supply Voltage 24 V | ||
Output Voltage 5 V | ||
Current Rating 2 A | ||
Power Rating 0.02kW | ||
Overall Length 61mm | ||
Overall Width 46mm | ||
Overall Depth 15 mm | ||
Maximum Operating Temperature 65°C | ||
Standards/Approvals No | ||
- Land van herkomst:
- GB



2 terminal blocks
Trimmer pot for adjusting on board clock
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Features & Benefits
A stand alone drive board designed to drive a stepper motor in unipolar mode.
Directly compatible with any of the RS stepper motors up to 2A
4-phase unipolar motor drive up to 2A/40Vdc per phase
Full, half and wave modes selectable
Motor speed selectable via adjustable on-board clock or externally via logic connectors
Enable and disable inputs allow a variety of start/stop control options to be implemented
Logic input/outputs TTL LS and CMOS compatible
Open drain power MOSFET phase outputs
Note
Stepper motor must have four phases and either five, six or eight wires.
Caution
Turn OFF power supply before connecting or disconnecting any wiring. Disconnecting the motor with the power ON will destroy the drive board.
Supplied with
User instructions
Gerelateerde Links
- STMicroelectronics E-L6219DS, Stepper Motor Controller, 46 V 0.75A 24-Pin, SOIC
- Renesas Electronics L298N, Stepper Motor Controller, 46 V 4A 15-Pin, MULTIWATT V
- STMicroelectronics E-L6219DS013TR, Stepper Motor Driver IC, 46 V 0.75A 24-Pin, SOIC
- Texas Instruments UC3717AN, Stepper Motor Driver IC, 46 V 1A 16-Pin, PDIP
- RS PRO 2 bar Aluminium Heating Oil Filter, 3/8 in BSPP, 61 x 61 x 75mm
- Schneider Electric BRS3 Series 3-Phase Stepper Motor Stepper Motor, 2.26Nm Torque, 34 V ac, 1.8 → 0.036°, 85 x
- Schneider Electric BRS3 Series 3-Phase Stepper Motor Stepper Motor, 13.5Nm Torque, 230 V ac, 1.8 → 0.036°, 110 x
- Schneider Electric BRS3 Series 3-Phase Stepper Motor Stepper Motor, 1.7Nm Torque, 230 V ac, 1.8 → 0.036°, 57.2 x