Parker DC Motor Controller, 110 → 120 V ac, 220 → 240 V ac, 1 Phase, 6 A, 210 V dc
- RS-stocknr.:
- 197-7434
- Fabrikantnummer:
- 507-00-20-00
- Fabrikant:
- Parker
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
la pièce
294,73 €
(excl. BTW)
356,62 €
(incl. BTW)
- RS-stocknr.:
- 197-7434
- Fabrikantnummer:
- 507-00-20-00
- Fabrikant:
- Parker
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Parker | |
| Phase | 1 | |
| Supply Voltage | 110 → 120 V ac, 220 → 240 V ac | |
| Current Rating | 6 A | |
| Voltage Rating | 210 V dc | |
| Alles selecteren | ||
|---|---|---|
Merk Parker | ||
Phase 1 | ||
Supply Voltage 110 → 120 V ac, 220 → 240 V ac | ||
Current Rating 6 A | ||
Voltage Rating 210 V dc | ||
N.v.t.
- Land van herkomst:
- GB
SSD 506, 507 & 508 Speed Controllers
Compact non-isolated motor speed control modules for dc. shunt wound and permanent magnet field motors.
DIN rail mounting
Suitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)
Fully isolated heatsink
Control signals available for zero speed, drive health and speed trim
Adjustable speed ramp up and ramp down times (1-15 secs)
Adjustable motor maximum and minimum speed limits
Adjustable armature current limit (0-100%)
Adjustable I.R. compensation (for armature voltage feedback control)
Switch selectable speed range
Switch selectable feedback mode either tacho-generator or armature voltage
Torque control of the motor is achieved by regulation of the armature current
Stall timer will isolate the motor current after 15 seconds to prevent the motor overheating
Inbuilt protection devices, high energy transient suppression, fuseless overcurrent protection above 200% overload
IP20 protection rating
Suitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)
Fully isolated heatsink
Control signals available for zero speed, drive health and speed trim
Adjustable speed ramp up and ramp down times (1-15 secs)
Adjustable motor maximum and minimum speed limits
Adjustable armature current limit (0-100%)
Adjustable I.R. compensation (for armature voltage feedback control)
Switch selectable speed range
Switch selectable feedback mode either tacho-generator or armature voltage
Torque control of the motor is achieved by regulation of the armature current
Stall timer will isolate the motor current after 15 seconds to prevent the motor overheating
Inbuilt protection devices, high energy transient suppression, fuseless overcurrent protection above 200% overload
IP20 protection rating
Note
The mains supply must be fused.
Gerelateerde Links
- Parker DC Motor Controller, 110 → 120 V ac, 220 → 240 V ac, 1 Phase, 12 A, 210 V dc
- Parker, DC Motor Controller, 1 Phase, Potentiometer Control, 110 → 120 V, 220 → 240 V, 12 A, DIN Rail
- 6220 Series Programmable AC/DC Source, 220 V, 210 mA
- Block 25kVA Open Frame Autotransformer, 220 V ac, 230 V ac Primary, 400 V ac Secondary, 3 UI 210/88 Core
- ABB B6-40-00 B Contactor, 220 Va ac, 690 Va ac, V dc, V dc Coil, 4-Pole, 20 A, 4 kW, 4NO
- ABB B6-22-00 B Contactor, 220 Va ac, 690 Va ac, V dc, V dc Coil, 4-Pole, 20 A, 4 kW, 2NC/2NO
- Sprint Electric DC Motor Controller, 110 V ac, 230 V ac, 1 Phase, 12.2 A, 180 V dc (@ 230 V ac), 90 V dc (@ 110 V ac)
- Sprint Electric DC Motor Controller, 110 V ac, 240 V ac, 1 Phase, 3.4 A, 180 V dc (@ 230 V ac), 90 V dc (@ 110 V ac)