Analog Devices 3-Axis Surface Sensor 2 V 3.6 V, I2C, Serial-SPI, Serial-4 Wire, Serial-3 Wire, LGA, 14-Pin
- RS-stocknr.:
- 799-5457P
- Fabrikantnummer:
- ADXL375BCCZ
- Fabrikant:
- Analog Devices
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 799-5457P
- Fabrikantnummer:
- ADXL375BCCZ
- Fabrikant:
- Analog Devices
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Analog Devices | |
| Sensor Type | Accelerometer | |
| Product Type | Sensor | |
| Number of Axis | 3 | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | I2C, Serial-SPI, Serial-4 Wire, Serial-3 Wire | |
| Minimum Supply Voltage | 2V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | LGA | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 22.6LSB/g | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 14 | |
| Height | 1mm | |
| Length | 3mm | |
| Standards/Approvals | No | |
| Series | ADXL375 | |
| Width | 5 mm | |
| Supply Current | 145μA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Analog Devices | ||
Sensor Type Accelerometer | ||
Product Type Sensor | ||
Number of Axis 3 | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type I2C, Serial-SPI, Serial-4 Wire, Serial-3 Wire | ||
Minimum Supply Voltage 2V | ||
Maximum Supply Voltage 3.6V | ||
Package Type LGA | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 22.6LSB/g | ||
Maximum Operating Temperature 85°C | ||
Pin Count 14 | ||
Height 1mm | ||
Length 3mm | ||
Standards/Approvals No | ||
Series ADXL375 | ||
Width 5 mm | ||
Supply Current 145μA | ||
Automotive Standard No | ||
Accelerometer ICs, Analog Devices
MEMS accelerometers and iSensor MEMS accelerometer subsystems from Analog Devices to accurately detect and measure acceleration, tilt, shock and vibration in performance-driven applications. Signal conditioning technology is integrated into every MEMS accelerometer, gyroscope, inertial measurement unit (IMU) from Analog Devices (ADI).
Single and multi-axis Accelerometer ICs, suitable for a wide range of applications where acceleration needs to be measured or monitored. Use to measure both static acceleration due to gravity and dynamic acceleration resulting from motion, shock, or vibration.