Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- RS-stocknr.:
- 724-4676P
- Fabrikantnummer:
- A1220LUA-T
- Fabrikant:
- Allegro Microsystems
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd in een zak)*
€ 21,00
(excl. BTW)
€ 25,50
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 1.680 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 25 - 95 | € 0,84 |
| 100 - 245 | € 0,694 |
| 250 - 495 | € 0,616 |
| 500 + | € 0,604 |
*prijsindicatie
- RS-stocknr.:
- 724-4676P
- Fabrikantnummer:
- A1220LUA-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | Chopper Stabilised BiCMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Bipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Package Type | SIP | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Width | 1.52 mm | |
| Length | 4.09mm | |
| Standards/Approvals | Lead (Pb) Free | |
| Series | A122 | |
| Height | 3.02mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| Response Time | 25μs | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology Chopper Stabilised BiCMOS | ||
Mount Type Through Hole | ||
Magnetic Type Bipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Package Type SIP | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Width 1.52 mm | ||
Length 4.09mm | ||
Standards/Approvals Lead (Pb) Free | ||
Series A122 | ||
Height 3.02mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
Response Time 25μs | ||
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection