Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin

Bekijk alle Motion Sensor ICs
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 5 eenheden)*

€ 4,73

(excl. BTW)

€ 5,725

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 95 stuk(s) vanaf 15 december 2025
  • Plus verzending 2.435 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
5 - 20€ 0,946€ 4,73
25 - 95€ 0,664€ 3,32
100 - 245€ 0,56€ 2,80
250 - 495€ 0,546€ 2,73
500 +€ 0,532€ 2,66

*prijsindicatie

Packaging Options:
RS-stocknr.:
724-4660
Fabrikantnummer:
A1120LUA-T
Fabrikant:
Allegro Microsystems
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Allegro Microsystems

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

Chopper Stabilised Precision Hall Effect

Mount Type

Through Hole

Magnetic Type

Unipolar

Maximum Frequency Response

800kHz

Minimum Supply Voltage

3V

Package Type

SIP

Maximum Supply Voltage

24V

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

150°C

Length

4.09mm

Series

A1120

Width

1.52 mm

Standards/Approvals

100% matte tin plated, Pb-Free

Height

3.02mm

Supply Current

4mA

Response Time

25μs

Automotive Standard

AEC-Q100

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems


The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is MADE possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Unipolar switchpoints

Resistant to physical stress

Superior temperature stability

Output short circuit protection

Operation from unregulated supply

Hall Effect Sensors, Allegro MicroSystems


Gerelateerde Links