Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V, SIP, 3-Pin
- RS-stocknr.:
- 680-7245P
- Fabrikantnummer:
- A1120EUA-T
- Fabrikant:
- Allegro Microsystems
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 18,75
(excl. BTW)
€ 22,75
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 9.775 stuk(s) vanaf 15 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 25 - 95 | € 0,75 |
| 100 - 245 | € 0,612 |
| 250 - 495 | € 0,576 |
| 500 + | € 0,54 |
*prijsindicatie
- RS-stocknr.:
- 680-7245P
- Fabrikantnummer:
- A1120EUA-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Chopper Stabilised Precision Hall Effect Switch | |
| Technology | Chopper Stabilised Hall Effect | |
| Mount Type | Through Hole | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 24V | |
| Package Type | SIP | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Series | A1120 | |
| Width | 1.52 mm | |
| Standards/Approvals | RoHS, 100% matte tin plated leadframe, Lead (Pb) Free | |
| Length | 4.09mm | |
| Height | 3.02mm | |
| Response Time | 25μs | |
| Supply Current | 4mA | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Chopper Stabilised Precision Hall Effect Switch | ||
Technology Chopper Stabilised Hall Effect | ||
Mount Type Through Hole | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 24V | ||
Package Type SIP | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Series A1120 | ||
Width 1.52 mm | ||
Standards/Approvals RoHS, 100% matte tin plated leadframe, Lead (Pb) Free | ||
Length 4.09mm | ||
Height 3.02mm | ||
Response Time 25μs | ||
Supply Current 4mA | ||
Automotive Standard AEC-Q100 | ||
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is MADE possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Unipolar switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply