Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, SOT-23, 3-Pin
- RS-stocknr.:
- 680-7125P
- Fabrikantnummer:
- A3212ELHLT-T
- Fabrikant:
- Allegro Microsystems
Subtotaal 5 eenheden (geleverd op een doorlopende strip)*
€ 3,46
(excl. BTW)
€ 4,185
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 4.305 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 5 + | € 0,692 |
*prijsindicatie
- RS-stocknr.:
- 680-7125P
- Fabrikantnummer:
- A3212ELHLT-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | CMOS, Chopper Stabilised | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Maximum Frequency Response | 340kHz | |
| Minimum Supply Voltage | 2.5V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 3.5V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | AEC-Q100 | |
| Width | 1.91 mm | |
| Series | A3211A3212 | |
| Height | 0.95mm | |
| Length | 2.98mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 2mA | |
| Response Time | 45μs | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology CMOS, Chopper Stabilised | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Maximum Frequency Response 340kHz | ||
Minimum Supply Voltage 2.5V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 3.5V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals AEC-Q100 | ||
Width 1.91 mm | ||
Series A3211A3212 | ||
Height 0.95mm | ||
Length 2.98mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 2mA | ||
Response Time 45μs | ||
A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.
Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.
Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.
Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.