Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin
- RS-stocknr.:
- 680-7090P
- Fabrikantnummer:
- A1101ELHLT-T
- Fabrikant:
- Allegro Microsystems
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 24,30
(excl. BTW)
€ 29,40
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 1.475 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 25 - 95 | € 0,972 |
| 100 - 245 | € 0,838 |
| 250 - 495 | € 0,818 |
| 500 + | € 0,80 |
*prijsindicatie
- RS-stocknr.:
- 680-7090P
- Fabrikantnummer:
- A1101ELHLT-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | BiCMOS | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3.8V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Height | 0.95mm | |
| Standards/Approvals | No | |
| Width | 1.91 mm | |
| Series | A1101 | |
| Length | 2.98mm | |
| Automotive Standard | AEC-Q100 | |
| Response Time | 4μs | |
| Supply Current | 7.5mA | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology BiCMOS | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3.8V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Height 0.95mm | ||
Standards/Approvals No | ||
Width 1.91 mm | ||
Series A1101 | ||
Length 2.98mm | ||
Automotive Standard AEC-Q100 | ||
Response Time 4μs | ||
Supply Current 7.5mA | ||
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor