STMicroelectronics 3-Axis Surface Accelerometer 1.71 V 2.1 V, I2C, TDM, LGA-14L, 14-Pin

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 7,06

(excl. BTW)

€ 8,54

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending 128 stuk(s) vanaf 15 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 9€ 7,06
10 - 99€ 6,92
100 - 249€ 6,77
250 - 499€ 6,64
500 +€ 6,52

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
252-3648
Fabrikantnummer:
AIS25BATR
Fabrikant:
STMicroelectronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

STMicroelectronics

Product Type

Accelerometer

Sensor Type

Accelerometer

Number of Axis

3

Technology

Digital

Mount Type

Surface

Interface Type

I2C, TDM

Minimum Supply Voltage

1.71V

Maximum Supply Voltage

2.1V

Package Type

LGA-14L

Minimum Operating Temperature

-40°C

Sensitivity

0.12mg/LSB

Pin Count

14

Maximum Operating Temperature

125°C

Series

AIS25BA

Height

0.86mm

Standards/Approvals

RoHS

Length

2.5mm

Width

2.5 mm

Automotive Standard

AEC-Q100

The STMicroelectronics MEMS digital output motion sensor: low noise, high bandwidth, 3-axis accelerometer with TDM interface is an ultralow noise, low latency, wide bandwidth, 3-axis digital accelerometer with a dedicated TDM interface designed to address automotive non-safety applications, in particular, wideband active noise control (ANC) and vibration monitoring. The AIS25BA has a user-selectable full-scale range of ±3.85/±7.7 g, a time-division multiplexing (TDM) interface for the sensor data, and an I²C interface for device configuration.

The AIS25BA is available in a small thin plastic land grid array package (LGA) and is guaranteed to operate over an extended temperature range from -40 °C to +125 °C.

3-axis accelerometer with user-selectable full-scale is ±3.85/±7.7 g

Wide and flat frequency response is from dc up to 2.4 kHz (typ)

Low latency (entire reading chain) is 266 μs @ 2 kHz (typ)

Ultralow noise density (typ: 30 μg/√Hz for X and Y axes; 50 μg/√Hz for Z-axis)

TDM (8/16/24 kHz) slave interface for sensor data and I²C interface for configuration

Supply voltage is 1.71 V to 2.1 V

Extended temperature range from -40 °C to +125 °C

Embedded self-test

Gerelateerde Links