Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, SOT-23, 3-Pin
- RS-stocknr.:
- 236-2723
- Fabrikantnummer:
- SM353LT
- Fabrikant:
- Honeywell
Subtotaal (1 rol van 3000 eenheden)*
€ 2.487,00
(excl. BTW)
€ 3.009,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 3.000 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 3000 + | € 0,829 | € 2.487,00 |
*prijsindicatie
- RS-stocknr.:
- 236-2723
- Fabrikantnummer:
- SM353LT
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Position Sensor | |
| Technology | Digital | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 1.65V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.4mm | |
| Width | 2.8 mm | |
| Series | Nanopower | |
| Length | 2.9mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 360nA | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Product Type Hall Effect Sensor | ||
Sensor Type Position Sensor | ||
Technology Digital | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 1.65V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Height 1.4mm | ||
Width 2.8 mm | ||
Series Nanopower | ||
Length 2.9mm | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 360nA | ||
- Land van herkomst:
- CN
The Honeywell Nanopower series magneto resistive (MR) sensor ICs are ultra-sensitive device designed to accommodate a wide range of applications with large Air gaps, small magnetic field and low power requirements. The sensor ICs respond to either a north or south pole applied in a direction parallel to the sensor. They do not require the magnet polarity to be identified, simplifying installation and potentially reducing system cost. The sensor ICs use a very low average current consumption and a push-pull output which does not require a pull-up resistor. The sensor ICs can operate from a supply voltage as low as 1.65 V, promoting energy efficiency.
Temperature range -40 °C to 85 °C
Non-chopper stabilized design
High sensitivity
Gerelateerde Links
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, Push Pull, SOT-23, 3-Pin
- Texas Instruments Surface Hall Effect Sensor 1.65 V 5.5 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 2.2 V 5.5 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 3 V 24 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 2.7 V 6.5 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 4.5 V 24 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor -28 V 28 V, SOT-23, 3-Pin