ams OSRAM AS5047U-HTSM Series Magnetic Hall Effect Sensor, 1024 ppr ppr, Analogue Signal
- RS-stocknr.:
- 200-9465
- Fabrikantnummer:
- AS5047U-HTSM
- Fabrikant:
- ams OSRAM
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 200-9465
- Fabrikantnummer:
- AS5047U-HTSM
- Fabrikant:
- ams OSRAM
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ams OSRAM | |
| Product Type | Hall Effect Sensor | |
| Encoder Technology | Magnetic | |
| Pulses Per Revolution | 1024ppr | |
| Series | AS5047U-HTSM | |
| Maximum Revolutions | 4096rpm | |
| Output Signal Type | Analogue | |
| Interface Type | SPI, UVW, PWM | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | AEC-Q100-002, IPC/JEDEC J-STD-020, AEC-Q100-004 | |
| Maximum Operating Temperature | 150°C | |
| Switching Frequency | 3059Hz | |
| Alles selecteren | ||
|---|---|---|
Merk ams OSRAM | ||
Product Type Hall Effect Sensor | ||
Encoder Technology Magnetic | ||
Pulses Per Revolution 1024ppr | ||
Series AS5047U-HTSM | ||
Maximum Revolutions 4096rpm | ||
Output Signal Type Analogue | ||
Interface Type SPI, UVW, PWM | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals AEC-Q100-002, IPC/JEDEC J-STD-020, AEC-Q100-004 | ||
Maximum Operating Temperature 150°C | ||
Switching Frequency 3059Hz | ||
- Land van herkomst:
- AT
The AS5047U is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. This new position sensor is equipped with a revolutionary integrated dynamic angle error compensation (DAEC™) with almost 0 latency at higher rotational speed. For increased signal quality at lower rotational speed, the dynamic filter system (DFS™) reduces transition noise. The robust design of the device suppresses the influence of any homogenous external stray magnetic field. A standard 4-wire SPI serial Interface with a CRC protection allows a host microcontroller to read 14-bit absolute angle position data from the AS5047U and to program non-volatile settings without a dedicated programmer. Incremental movements are indicated on a set of ABI signals with a maximum resolution of 16989 steps / 4096 pulses per revolution.
Gerelateerde Links
- ams OSRAM Hall Effect Sensor, TSSOP, 14-Pin
- ams OSRAM Surface Mount Hall Effect Sensor, TSSOP, 14-Pin
- ams OSRAM Surface Mount Hall Effect Sensor, TSSOP, Analogue, 20-Pin
- ams OSRAM Hall Effect Sensor, SOIC8
- ams OSRAM Hall Effect Sensor, WLCSP
- ams OSRAM Surface Mount Position Sensor, TSSOP
- ams OSRAM Hall Effect Sensor, QFN, 16-Pin
- ams OSRAM Surface Mount Hall Effect Sensor, SOIC, 8-Pin
