Microchip 9-Axis Surface Mount Sensor, Module, I2C, 16-Pin
- RS-stocknr.:
- 178-5352
- Fabrikantnummer:
- MM7150-AB0
- Fabrikant:
- Microchip
Opgeheven
- RS-stocknr.:
- 178-5352
- Fabrikantnummer:
- MM7150-AB0
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Sensor Type | Accelerometer, Gyroscope, Magnetometer | |
| Number of Axis | 9 | |
| Mounting Type | Surface Mount | |
| Interface Type | I2C | |
| Maximum Frequency Response | 400kHz | |
| Maximum Operating Supply Voltage | 3.6 V | |
| Minimum Operating Supply Voltage | 2.3 V | |
| Package Type | Module | |
| Pin Count | 16 | |
| Maximum Operating Temperature | +70 °C | |
| Minimum Operating Temperature | -40 °C | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Sensor Type Accelerometer, Gyroscope, Magnetometer | ||
Number of Axis 9 | ||
Mounting Type Surface Mount | ||
Interface Type I2C | ||
Maximum Frequency Response 400kHz | ||
Maximum Operating Supply Voltage 3.6 V | ||
Minimum Operating Supply Voltage 2.3 V | ||
Package Type Module | ||
Pin Count 16 | ||
Maximum Operating Temperature +70 °C | ||
Minimum Operating Temperature -40 °C | ||
MM7150 Motion Sensor Module
The Microchip MM7150 Motion Sensor Module is a fully integrated inertial measurement device suitable for a wide range of applications requiring motion and 3D positioning data. The module incorporates MEMS technology coupling an accelerometer, gyroscope and magnetometer with Microchip’s SSC7150 Motion Coprocessor to provide a complete 9-axis sensor fusion solution. The form factor is a compact, single sided, 17mm x 17mm PCB which is easy to solder; ideal for embedded applications.
The on-board SSC7150 Coprocessor simplifies the process of incorporating sensor fusion into products; included within the firmware are all the required algorithms to filter, compensate, calibrate and fuse the raw 9-axis data. With a simple I2C connection the host MCU can easily tap into the motion and position data.
The on-board SSC7150 Coprocessor simplifies the process of incorporating sensor fusion into products; included within the firmware are all the required algorithms to filter, compensate, calibrate and fuse the raw 9-axis data. With a simple I2C connection the host MCU can easily tap into the motion and position data.
Features
Embedded SSC7150 Motion Coprocessor
Integrated Bosch Accelerometer, Gyroscope and Magnetometer
Low Power – 13.25mA in Active Mode
Sensor Power Management
Host I2C Interface
Small, Single Sided PCB – 17mm x 17mm
Integrated Bosch Accelerometer, Gyroscope and Magnetometer
Low Power – 13.25mA in Active Mode
Sensor Power Management
Host I2C Interface
Small, Single Sided PCB – 17mm x 17mm
Sensor Modules, Microchip