Allegro Microsystems Surface Hall Effect Sensor 3 V 24 V, SOT-23, 3-Pin
- RS-stocknr.:
- 177-5549
- Fabrikantnummer:
- A1126LLHLT-T
- Fabrikant:
- Allegro Microsystems
Subtotaal (1 rol van 3000 eenheden)*
€ 2.448,00
(excl. BTW)
€ 2.961,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 07 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 3000 + | € 0,816 | € 2.448,00 |
*prijsindicatie
- RS-stocknr.:
- 177-5549
- Fabrikantnummer:
- A1126LLHLT-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | Digital | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 24V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Series | A1126 | |
| Width | 1.91 mm | |
| Length | 2.98mm | |
| Standards/Approvals | RoHS | |
| Height | 0.95mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| Response Time | 25μs | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology Digital | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 24V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Series A1126 | ||
Width 1.91 mm | ||
Length 2.98mm | ||
Standards/Approvals RoHS | ||
Height 0.95mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
Response Time 25μs | ||
- Land van herkomst:
- US
A1126 Chopper Stabilised Omnipolar Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1126 is an omnipolar, ultrasensitive Hall-effect switch with a digital output. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output.
This device has an integrated regulator permitting operation to 24 V.
They are suitable for operation through extended temperature ranges from -40°C to 150°C.
Activation the A1126 with either a north or a south polarity and without a magnetic field, the output is off. This magnetic polarity independence makes it an excellent replacement for reed switches. It also simplifies manufacturing as it does not require the magnets to be orientated.
The A1126 is rated for operation between the ambient temperatures –40°C to 150°C.
AEC-Q100 automotive qualified
Omnipolar operation
High speed, 4-phase chopper stabilisation
Low switchpoint drift
Superior temperature stability
Insensitive to physical stress
Reverse-battery protection
Robust EMC capability
Robust ESD
Hall Effect Sensors, Allegro MicroSystems
Gerelateerde Links
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOT-23, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOT-23W, 5-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, MLP, 6-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOIC, 8-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor Switch, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor, CB, 5-Pin