Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin
- RS-stocknr.:
- 177-5544
- Fabrikantnummer:
- A1102ELHLT-T
- Fabrikant:
- Allegro Microsystems
Subtotaal (1 rol van 3000 eenheden)*
€ 3.387,00
(excl. BTW)
€ 4.098,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 06 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 3000 + | € 1,129 | € 3.387,00 |
*prijsindicatie
- RS-stocknr.:
- 177-5544
- Fabrikantnummer:
- A1102ELHLT-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Number of Axis | 1 | |
| Technology | BiCMOS | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3.8V | |
| Maximum Supply Voltage | 24V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Height | 0.95mm | |
| Series | A1102 | |
| Width | 1.91 mm | |
| Standards/Approvals | No | |
| Length | 2.98mm | |
| Supply Current | 4.1mA | |
| Response Time | 4μs | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Number of Axis 1 | ||
Technology BiCMOS | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3.8V | ||
Maximum Supply Voltage 24V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Height 0.95mm | ||
Series A1102 | ||
Width 1.91 mm | ||
Standards/Approvals No | ||
Length 2.98mm | ||
Supply Current 4.1mA | ||
Response Time 4μs | ||
Automotive Standard AEC-Q100 | ||
- Land van herkomst:
- US
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor
Hall Effect Sensors, Allegro MicroSystems
Gerelateerde Links
- Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOT-23, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOT-23W, 5-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, MLP, 6-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOIC, 8-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor Switch, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor, CB, 5-Pin