Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- RS-stocknr.:
- 170-9108
- Fabrikantnummer:
- A1120LUA-T
- Fabrikant:
- Allegro Microsystems
Subtotaal (1 zak van 500 eenheden)*
€ 375,00
(excl. BTW)
€ 455,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 2.000 stuk(s) vanaf 15 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per Zak* |
|---|---|---|
| 500 + | € 0,75 | € 375,00 |
*prijsindicatie
- RS-stocknr.:
- 170-9108
- Fabrikantnummer:
- A1120LUA-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | Chopper Stabilised Precision Hall Effect | |
| Mount Type | Through Hole | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 24V | |
| Package Type | SIP | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Width | 1.52 mm | |
| Series | A1120 | |
| Standards/Approvals | 100% matte tin plated, Pb-Free | |
| Length | 4.09mm | |
| Height | 3.02mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| Response Time | 25μs | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology Chopper Stabilised Precision Hall Effect | ||
Mount Type Through Hole | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 24V | ||
Package Type SIP | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Width 1.52 mm | ||
Series A1120 | ||
Standards/Approvals 100% matte tin plated, Pb-Free | ||
Length 4.09mm | ||
Height 3.02mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
Response Time 25μs | ||
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is MADE possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Unipolar switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply
Hall Effect Sensors, Allegro MicroSystems
Gerelateerde Links
- Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor Switch, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor Switch, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, MLP, 6-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor, CB, 5-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOIC, 8-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor, SOT-23, 3-Pin