SICK SKM36 Series Safety Encoder Encoder, 128ppr ppr, Sin/Cos Signal, Knurled Type, 15mm Shaft

Bekijk alle Motion Control Sensors

Subtotaal (1 eenheid)*

€ 290,58

(excl. BTW)

€ 351,60

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 4 stuk(s) klaar voor verzending
  • 5 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 290,58

*prijsindicatie

RS-stocknr.:
284-9271
Fabrikantnummer:
SKM36-HFA0-K02 / 1034094
Fabrikant:
SICK
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SICK

Encoder Technology

Safety Encoder

Series

SKM36

Pulses Per Revolution

128ppr

Maximum Revolutions

4096rpm

Output Signal Type

Sin/Cos

Shaft Type

Knurled

Shaft Diameter

15mm

Supply Voltage

7 → 12 V dc

IP Rating

IP50

Interface

HIPERFACE

Overall Height

45mm

Overall Width

45mm

Overall Depth

40mm

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+110°C

Mounting Type

Spring Mounting Plate

Connection Type

Male Connector

Current Rating

60 mA

Land van herkomst:
DE

Overview


The motor feedback system features a rotary model with a HIPERFACE communication interface, allowing integration of sine/cosine periods per revolution, and has a safety system, a tapered shaft, and an optical technology. The encoder represents the inaugural offering of a new generation of optical motor feedback systems. With 128 sine/cosine signals per revolution, this family sets the standard among MFB systems with a HIPERFACE interface. A notable feature of this generation is its exceptionally small code disk, with a mere 2 mm code track radius, enabling comprehensive scanning. This system compensates for inevitable eccentricity errors in the code disk, ball bearing, and shaft encountered in conventional systems.

Moreover, the placement of the code disk in the middle of the rotary axle eliminates limitations on high angular speeds imposed by the code disk. It offers absolute position indication with an increment number of 4,096 increments per revolution and a maximum of 4,096 revolutions. Key features of this product family include the storage of motor-specific data in the electronic type label and programmability. Certified to SIL2/PL d standards, these motor feedback systems meet current safety technology requirements and streamline the certification process.

At a glance


Motor feedback systems for the standard performance range
128 sine/cosine periods per revolution
Absolute position with a resolution of 4,096 increments per revolution and 4,096 revolutions with the multiturn system
Programming of the position value and electronic type label
Integrated version and stand-alone design
Conforms to RoHs

Your Benefit


The small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors
The stand-alone version is ideally suited as a master and path encoders
The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market
The consistent mechanical components in SEK/SEL37 allow for a high degree of flexibility with various encoder systems

Applications


Motion monitoring via HIPERFACE

Note


Gerelateerde Links