Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Toshiba
	Logic Family	74VHC
	Logic Function	Monostable Multivibrator
	Number of Elements per Chip	27
	Maximum High Level Output Current	-8mA
	Maximum Low Level Output Current	8mA
	Minimum Pulse Width	5 ns
	Maximum Propagation Delay Time @ Maximum CL	24.5ns
	Maximum Quiescent Current	80µA
	Mounting Type	Surface Mount
	Package Type	TSSOP
	Pin Count	16
	Dimensions	5 x 4.4 x 1mm
	Height	1mm
	Length	5mm
	Maximum Operating Supply Voltage	5.5 V
	Width	4.4mm
	Minimum Operating Temperature	-40 °C
	Maximum Operating Temperature	+125 °C
	Propagation Delay Test Condition	50pF
	Minimum Operating Supply Voltage	2 V
	Automotive Standard	AEC-Q100

	Alles selecteren
	Merk Toshiba
	Logic Family 74VHC
	Logic Function Monostable Multivibrator
	Number of Elements per Chip 27
	Maximum High Level Output Current -8mA
	Maximum Low Level Output Current 8mA
	Minimum Pulse Width 5 ns
	Maximum Propagation Delay Time @ Maximum CL 24.5ns
	Maximum Quiescent Current 80µA
	Mounting Type Surface Mount
	Package Type TSSOP
	Pin Count 16
	Dimensions 5 x 4.4 x 1mm
	Height 1mm
	Length 5mm
	Maximum Operating Supply Voltage 5.5 V
	Width 4.4mm
	Minimum Operating Temperature -40 °C
	Maximum Operating Temperature +125 °C
	Propagation Delay Test Condition 50pF
	Minimum Operating Supply Voltage 2 V
	Automotive Standard AEC-Q100

The 74VHC123A/221AFT are high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with silicon gate C2MOS technology. There are two trigger inputs, A input (negative edge), and B input (positive edge). These inputs are valid for a slow rise/fall time signal (tr = tf = 1 s) as they are schmitt trigger inputs. This device may also be triggered by using CLR input (positive edge).After triggering, the output stays in a MONOSTABLE state for a time period determined by the external resistor and capacitor (RX, CX). A low level at the CLR input breaks this state. Limits for CX and RX are:External capacitor, CX: No limit External resistor, RX: VCC = 2.0 V more than 5 kΩ CC ≥ 3.0 V more than 1 kΩ An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages

Wide operating temperature range: Topr = -40 to 125 
High speed: Propagation delay time = 8.1 ns (typ.) at VCC = 5 V
Low power dissipation:
Standby state: 4.0 μA (max) at Ta = 25 
Active state: 750 μA (max) at Ta = 25 
High noise immunity: VNIH = VNIL = 28 % VCC (min)
Power-down protection is provided on all inputs.
Balanced propagation delays: tPLH ≈ tPHL
Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V
Pin and function compatible with 74HC123,74HC221 type

Aantal stuks	Per stuk
150 - 450	€ 0,123
500 - 950	€ 0,11
1000 +	€ 0,104

Toshiba 74VHC221AFT, 27 Dual Monostable Multivibrator 8mA, 16-Pin TSSOP

GRATIS bezorging voor bestellingen vanaf € 75,00

Gerelateerde Links