Nexperia, 1 Monostable Multivibrator 74LVC 32 mA, 8-Pin TSSOP

Bulkkorting beschikbaar

Subtotaal 250 eenheden (geleverd op een wiel)*

€ 89,50

(excl. BTW)

€ 108,25

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2.125 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks
Per stuk
250 - 600€ 0,358
625 - 1225€ 0,339
1250 - 2475€ 0,282
2500 +€ 0,275

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
170-5405P
Fabrikantnummer:
74LVC1G123DP,125
Fabrikant:
Nexperia
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Nexperia

Logic Family

74LVC

Product Type

Monostable Multivibrator

Number of Elements per Chip

1

Maximum High Level Output Current

-32mA

Maximum Low Level Output Current

32mA

Minimum Pulse Width

2.5ns

Maximum Quiescent Current

20μA

Minimum Supply Voltage

1.65V

Mount Type

Surface

Package Type

TSSOP

Maximum Supply Voltage

5.5V

Pin Count

8

Maximum Propagation Delay Time @ CL

19ns

Minimum Operating Temperature

-40°C

Multivibrator Type

Monostable Multivibrator

Maximum Operating Temperature

125°C

Series

74LVC1G123

Length

3.1mm

Height

0.95mm

Standards/Approvals

No

Automotive Standard

No

The 74LVC1G123 is a single retriggerable monostable multivibrator with Schmitt trigger inputs. Output Pulse width is controlled by three methods. The Basic Pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the Basic output Pulse width may be extended by retriggering the gated Active LOW-going edge input (A) or the Active HIGH-going edge input (B). By repeating this process, the output Pulse period (Q = HIGH) can be MADE as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input CLR, which also inhibits the triggering.

Wide supply voltage range

High noise immunity

CMOS low power consumption

DC triggered from Active HIGH or Active LOW inputs

Retriggerable for very long pulses up to 100 % duty factor

Direct reset terminates output Pulse

Schmitt trigger on all inputs

Power-on-reset on outputs

Inputs accept voltages up to 5.5 V

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.