Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Nexperia
	Logic Family	74LVC
	Logic Function	Monostable Multivibrator
	Number of Elements per Chip	1
	Maximum High Level Output Current	-32mA
	Maximum Low Level Output Current	32mA
	Minimum Pulse Width	2.5 ns
	Maximum Propagation Delay Time @ Maximum CL	20.3 ns @ 50 pF
	Maximum Quiescent Current	20µA
	Mounting Type	Surface Mount
	Package Type	TSSOP
	Pin Count	8
	Dimensions	3.1 x 3.1 x 0.95mm
	Height	0.95mm
	Length	3.1mm
	Minimum Operating Supply Voltage	1.65 V
	Width	3.1mm
	Maximum Operating Supply Voltage	5.5 V
	Propagation Delay Test Condition	50pF
	Maximum Operating Temperature	+125 °C
	Minimum Operating Temperature	-40 °C

	Alles selecteren
	Merk Nexperia
	Logic Family 74LVC
	Logic Function Monostable Multivibrator
	Number of Elements per Chip 1
	Maximum High Level Output Current -32mA
	Maximum Low Level Output Current 32mA
	Minimum Pulse Width 2.5 ns
	Maximum Propagation Delay Time @ Maximum CL 20.3 ns @ 50 pF
	Maximum Quiescent Current 20µA
	Mounting Type Surface Mount
	Package Type TSSOP
	Pin Count 8
	Dimensions 3.1 x 3.1 x 0.95mm
	Height 0.95mm
	Length 3.1mm
	Minimum Operating Supply Voltage 1.65 V
	Width 3.1mm
	Maximum Operating Supply Voltage 5.5 V
	Propagation Delay Test Condition 50pF
	Maximum Operating Temperature +125 °C
	Minimum Operating Temperature -40 °C

The 74LVC1G123 is a single retriggerable monostable multivibrator with Schmitt trigger inputs. Output pulse width is controlled by three methods. The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (A) or the active HIGH-going edge input (B). By repeating this process, the output pulse period (Q = HIGH) can be made as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input CLR, which also inhibits the triggering.

Wide supply voltage range
High noise immunity
CMOS low power consumption
DC triggered from active HIGH or active LOW inputs
Retriggerable for very long pulses up to 100 % duty factor
Direct reset terminates output pulse
Schmitt trigger on all inputs
Power-on-reset on outputs
Inputs accept voltages up to 5.5 V

Nexperia 74LVC1G123DP,125 Monostable Multivibrator 32mA, 8-Pin TSSOP

GRATIS bezorging voor bestellingen vanaf € 75,00

Gerelateerde Links