ABB Temperature Monitoring Relay, SPDT, DIN Rail
- RS-stocknr.:
- 876-5005
- Fabrikantnummer:
- 1SVR740722R1400 CM-MSS.21P
- Fabrikant:
- ABB
Subtotaal (1 eenheid)*
€ 139,08
(excl. BTW)
€ 168,29
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 139,08 |
*prijsindicatie
- RS-stocknr.:
- 876-5005
- Fabrikantnummer:
- 1SVR740722R1400 CM-MSS.21P
- Fabrikant:
- ABB
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ABB | |
| Monitoring Application | Temperature | |
| Contact Configuration | SPDT | |
| Mounting Type | DIN Rail | |
| Time Delay | <100ms | |
| Temperature Sensitivity | Overtemperature, Winding Temperature | |
| Series | CM-MSS | |
| Hazardous Area Certification | ATEX | |
| Terminal Type | Push In | |
| Maximum Operating Temperature | +60°C | |
| Width | 22.5mm | |
| Current Range | Maximum of 3.7mA | |
| Dimensions | 103.7 x 22.5 x 85.6mm | |
| Operating Temperature Range | +60°C | |
| Length | 103.7mm | |
| Height | 85.6mm | |
| Minimum Operating Temperature | -25°C | |
| Special Features | Automatic Reset, Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Non-Volatile Fault Storage, One Measuring Circuit, Over Heating Protection, Over Load Protection, Short-Circuit Monitoring of the Sensor Circuit | |
| Alles selecteren | ||
|---|---|---|
Merk ABB | ||
Monitoring Application Temperature | ||
Contact Configuration SPDT | ||
Mounting Type DIN Rail | ||
Time Delay <100ms | ||
Temperature Sensitivity Overtemperature, Winding Temperature | ||
Series CM-MSS | ||
Hazardous Area Certification ATEX | ||
Terminal Type Push In | ||
Maximum Operating Temperature +60°C | ||
Width 22.5mm | ||
Current Range Maximum of 3.7mA | ||
Dimensions 103.7 x 22.5 x 85.6mm | ||
Operating Temperature Range +60°C | ||
Length 103.7mm | ||
Height 85.6mm | ||
Minimum Operating Temperature -25°C | ||
Special Features Automatic Reset, Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Non-Volatile Fault Storage, One Measuring Circuit, Over Heating Protection, Over Load Protection, Short-Circuit Monitoring of the Sensor Circuit | ||
CM-MSS Series Thermistor Motor Protection Relays
Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance
The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:
Main features include:
Dynamic interrupted wire detection
Wide control supply voltage range for this series 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available
Dynamic interrupted wire detection
Wide control supply voltage range for this series 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available
Single Sensor Input Version
Wire Break Detection
Wire Break Detection
Approvals
Some products also have the ATEX approval for the use in hazardous areas.
Gerelateerde Links
- ABB Temperature Monitoring Relay, SPDT, DIN Rail
- ABB Temperature Monitoring Relay, 3 Phase, SPDT, DIN Rail
- ABB Temperature Monitoring Relay, 1 Phase, SPDT, DIN Rail
- ABB Temperature Monitoring Relay, DPDT, DIN Rail
- ABB Temperature Monitoring Relay, 1 Phase, DPDT, DIN Rail
- ABB Temperature Monitoring Relay, 1 Phase, DPDT, 220 → 240V ac, DIN Rail
- ABB Temperature Monitoring Relay, SPDT
- ABB Current Monitoring Relay, 1 Phase, DPDT, DIN Rail
