Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Monitoring Application	Temperature
	Contact Configuration	SPDT
	Mounting Type	DIN Rail
	Time Delay	<100ms
	Temperature Sensitivity	Overtemperature, Winding Temperature
	Series	CM-MSS
	Hazardous Area Certification	ATEX
	Height	85.6mm
	Dimensions	103.7 x 22.5 x 85.6mm
	Current Range	Maximum of 3.7mA
	Operating Temperature Range	+60°C
	Length	103.7mm
	Terminal Type	Push In
	Special Features	Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Manual & Automatic Reset, Non-Volatile Fault Storage, One Measuring Circuit, Over Heating Protection, Over Load Protection, Remote Reset, Short-Circuit Monitoring of the Sensor Circuit
	Minimum Operating Temperature	-25°C
	Width	22.5mm
	Maximum Operating Temperature	+60°C

	Alles selecteren
	Merk ABB
	Monitoring Application Temperature
	Contact Configuration SPDT
	Mounting Type DIN Rail
	Time Delay <100ms
	Temperature Sensitivity Overtemperature, Winding Temperature
	Series CM-MSS
	Hazardous Area Certification ATEX
	Height 85.6mm
	Dimensions 103.7 x 22.5 x 85.6mm
	Current Range Maximum of 3.7mA
	Operating Temperature Range +60°C
	Length 103.7mm
	Terminal Type Push In
	Special Features Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Manual & Automatic Reset, Non-Volatile Fault Storage, One Measuring Circuit, Over Heating Protection, Over Load Protection, Remote Reset, Short-Circuit Monitoring of the Sensor Circuit
	Minimum Operating Temperature -25°C
	Width 22.5mm
	Maximum Operating Temperature +60°C

CM-MSS Series Thermistor Motor Protection Relays

Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance

The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:

Main features include:
Dynamic interrupted wire detection
Wide control supply voltage range for this series 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available

Single Sensor Input Version
Wire Break Detection

Approvals

Some products also have the ATEX approval for the use in hazardous areas.

ABB Temperature Monitoring Relay, SPDT, DIN Rail

GRATIS bezorging voor bestellingen vanaf € 75,00

CM-MSS Series Thermistor Motor Protection Relays

Approvals

Gerelateerde Links