Dold Monitoring Relay, 3 Phase, SPDT, DIN Rail, 110V ac, 230 V ac 24 V dc

RS-stocknr.:: 445-9074
Fabrikantnummer:: BH9097.38/001 3AC400V AC40A
Fabrikant:: Dold

Dold Monitoring Relay, 3 Phase, SPDT, DIN Rail, 110V ac, 230 V ac 24 V dc

Subtotaal (1 eenheid)*

€ 532,07

(excl. BTW)

€ 643,80

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

1 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 532,07

*prijsindicatie

RS-stocknr.:: 445-9074
Fabrikantnummer:: BH9097.38/001 3AC400V AC40A
Fabrikant:: Dold

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Dold
	Product Type	Monitoring Relay
	Electrical Phase	3
	Function	Motor Control
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Switching Voltage	230V ac
	Terminal Type	Screw
	IP Rating	IP20, IP40
	Supply AC Voltage	110, 230V ac
	Supply DC Voltage	24 V dc
	Minimum Operating Temperature	-20°C
	Contact Current	5A
	Maximum Operating Temperature	55°C
	Height	84mm
	Width	45mm
	Standards/Approvals	IEC/EN 61 000-4-2, EN 50 005, IEC/EN 61 000-4-6, IEC/EN 60 529, EN 55 011, DIN 46 228-1/-2/-3/-4, IEC/EN 60 068-2-6, IEC/EN 60255-26, IEC/EN 61 000-4-4, DIN/VDE 0435-303, IEC/EN 60 947-5-1, IEC 60 664-1, UL Subject 94, IEC/EN 61 000-4-5, IEC/EN 61 000-4-3, IEC/EN 60255-1, IEC/EN 60 068-1, IEC/EN 60 715
	Series	BH 9097
	Length	121mm

	Alles selecteren
	Merk Dold
	Product Type Monitoring Relay
	Electrical Phase 3
	Function Motor Control
	Contact Configuration SPDT
	Mount Type DIN Rail
	Switching Voltage 230V ac
	Terminal Type Screw
	IP Rating IP20, IP40
	Supply AC Voltage 110, 230V ac
	Supply DC Voltage 24 V dc
	Minimum Operating Temperature -20°C
	Contact Current 5A
	Maximum Operating Temperature 55°C
	Height 84mm
	Width 45mm
	Standards/Approvals IEC/EN 61 000-4-2, EN 50 005, IEC/EN 61 000-4-6, IEC/EN 60 529, EN 55 011, DIN 46 228-1/-2/-3/-4, IEC/EN 60 068-2-6, IEC/EN 60255-26, IEC/EN 61 000-4-4, DIN/VDE 0435-303, IEC/EN 60 947-5-1, IEC 60 664-1, UL Subject 94, IEC/EN 61 000-4-5, IEC/EN 61 000-4-3, IEC/EN 60255-1, IEC/EN 60 068-1, IEC/EN 60 715
	Series BH 9097
	Length 121mm

Land van herkomst:: DE

Load monitor BH 9097

The load monitor is suitable for monitoring electrical industrial drive systems with variable motor loads.

Features:

The BH 9097 load monitor monitors the actual power consumption of electrical loads

The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level

P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches

Test / reset buttons for simple start-up

Switch state indicator via 2 LEDs

For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage

Up to 40 A without external current transformer

Configurable start-up bridging, configurable response delay

Overall width 45 mm

Load monitor

Using the load monitor allows all machines that are driven by electric motors to be monitored securely. This load monitor can be used for early detection of damage to the bearings or gear, blockage or idling of the screw-conveyors or conveyor belts, as well as V-belt failures or filter blockages, in order to prevent more severe damage or machine failures.

The Telehaase load monitor does not require additional sensors or transducers. It can be used without a current transformer from 230 to 6930 W. Even when operating a frequency inverter, monitoring tasks are completed easily. With all load monitors, start-up bridging and a switching delay can be calibrated.

Standards

IEC 255, EN 60255, VDE 0435 part 303