Schneider Electric Monitoring Relay, DPDT, Flush, 440V ac 440 V dc
- RS-stocknr.:
- 272-7466
- Fabrikantnummer:
- IMD-IM400C
- Fabrikant:
- Schneider Electric
Subtotaal (1 eenheid)*
€ 4.921,61
(excl. BTW)
€ 5.955,15
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 30 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 4.921,61 |
*prijsindicatie
- RS-stocknr.:
- 272-7466
- Fabrikantnummer:
- IMD-IM400C
- Fabrikant:
- Schneider Electric
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Schneider Electric | |
| Application | Insulation | |
| Product Type | Monitoring Relay | |
| Contact Configuration | DPDT | |
| Mount Type | Flush | |
| Power Consumption | 25VA | |
| Terminal Type | Screw | |
| IP Rating | IP20, IP54 | |
| Maximum Insulation Resistance | 10mΩ | |
| Minimum Operating Temperature | -25°C | |
| Supply AC Voltage | 440V ac | |
| Minimum Insulation Resistance | 10Ω | |
| Supply DC Voltage | 440 V dc | |
| Maximum Operating Temperature | 55°C | |
| Series | Vigilohm | |
| Standards/Approvals | IEC 61010-1 | |
| Height | 123mm | |
| Length | 123mm | |
| Width | 159mm | |
| Alles selecteren | ||
|---|---|---|
Merk Schneider Electric | ||
Application Insulation | ||
Product Type Monitoring Relay | ||
Contact Configuration DPDT | ||
Mount Type Flush | ||
Power Consumption 25VA | ||
Terminal Type Screw | ||
IP Rating IP20, IP54 | ||
Maximum Insulation Resistance 10mΩ | ||
Minimum Operating Temperature -25°C | ||
Supply AC Voltage 440V ac | ||
Minimum Insulation Resistance 10Ω | ||
Supply DC Voltage 440 V dc | ||
Maximum Operating Temperature 55°C | ||
Series Vigilohm | ||
Standards/Approvals IEC 61010-1 | ||
Height 123mm | ||
Length 123mm | ||
Width 159mm | ||
- Land van herkomst:
- IN
The Schneider Electric device belongs to the vigil ohm range designed to monitor ungrounded, IT electrical networks, in accordance to installation and products standards. It measures the system insulation resistance by injecting a low frequency AC current between the network and ground.
Auto-test
HMI screen
Protection is IP52 and rear IP20
RS485 communication port
Modbus protocol
Gerelateerde Links
- Schneider Electric Phase/Voltage Monitoring Relays, 1 Phase, SPDT, Flush, 440V ac 440 V dc
- Schneider Electric Monitoring Relay, 1 Phase, SPDT, Flush, 110V ac, 230 V ac 250 V dc
- Schneider Electric Monitoring Relay, DPDT, Flush, 0mA to 3mA, 48 V dc, 24V ac
- Schneider Electric Monitoring Relay, Flush
- Schneider Electric Monitoring Relay, DIN Rail
- ABB Monitoring Relay, 3 Phase, 208/440 V ac Monitor Range, SPDT, DIN Rail, 440V ac
- Schneider Electric Insulation Tester, Flush
- Hiquel Monitoring Relay, 3 Phase, 150/440 V Monitor Range, DPDT, DIN Rail, 115V ac, 180 V ac, 440 V ac, 550 V ac