Carlo Gavazzi Monitoring Relay, 1 Phase, 1 NO/1 NC, DIN Rail, 100μA to 10A, 24 → 48 V ac, 115V
- RS-stocknr.:
- 256-5058
- Fabrikantnummer:
- DIB01CD4810A
- Fabrikant:
- Carlo Gavazzi
Subtotaal (1 eenheid)*
€ 154,66
(excl. BTW)
€ 187,14
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 5 stuk(s) vanaf 17 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 154,66 |
*prijsindicatie
- RS-stocknr.:
- 256-5058
- Fabrikantnummer:
- DIB01CD4810A
- Fabrikant:
- Carlo Gavazzi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Carlo Gavazzi | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | 1 NO/1 NC | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 100μA | |
| Power Consumption | 4VA | |
| Maximum Current Sensed | 10A | |
| Terminal Type | Screw | |
| Time Delay | 0.1 → 30 s | |
| IP Rating | IP20 | |
| Supply AC Voltage | 115V | |
| Minimum Operating Temperature | -20°C | |
| Supply DC Voltage | 24 → 48 V ac | |
| Maximum Operating Temperature | 60°C | |
| Width | 80mm | |
| Height | 99.5mm | |
| Standards/Approvals | CSA, UL, CE marking | |
| Length | 22.5mm | |
| Alles selecteren | ||
|---|---|---|
Merk Carlo Gavazzi | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration 1 NO/1 NC | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 100μA | ||
Power Consumption 4VA | ||
Maximum Current Sensed 10A | ||
Terminal Type Screw | ||
Time Delay 0.1 → 30 s | ||
IP Rating IP20 | ||
Supply AC Voltage 115V | ||
Minimum Operating Temperature -20°C | ||
Supply DC Voltage 24 → 48 V ac | ||
Maximum Operating Temperature 60°C | ||
Width 80mm | ||
Height 99.5mm | ||
Standards/Approvals CSA, UL, CE marking | ||
Length 22.5mm | ||
- Land van herkomst:
- IT
The Carlo Gavazzi DIB01 is a precise TRMS AC/DC over or under current monitoring relays. Direct measuring or through current transformer. Owing to the built-in latch function, the ON-position of the relay output can be maintained. Inhibit function can be used to avoid relay operation when not desired. The LED's indicate the state of the alarm and the output relay. Through the built-in shunt it is possible to monitor loads up to 10 A AC/DC.
Selection of measuring range by DIP-switches
Measuring ranges from 0.1 mA to 10 A AC/DC
Adjustable current on relative scale
Adjustable hysteresis on relative scale
Adjustable delay function (0.1 to 30 s)
Gerelateerde Links
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail, 100μA to 5A, 115V ac, 230 V ac
- Carlo Gavazzi Monitoring Relay, 3 Phase, SPDT, 115V, 24 V 48 V dc
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail, 115V ac, 230 V ac
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail, 115V ac, 230 V ac 48 V ac
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail, 48 V ac, 115V ac, 230 V ac
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail, 500mA to 5A, 115V ac, 230 V ac
- Carlo Gavazzi Power Relay, 115V ac Coil, 10A Switching Current, DPDT
- Carlo Gavazzi Monitoring Relay, 3 Phase, SPDT, DIN Rail to 10A
