Dold Insulation Monitoring Relay, 1, 3 Phase, SPDT, 0.8 → 1.1 V, DIN Rail
- RS-stocknr.:
- 240-9033
- Fabrikantnummer:
- AI897 AC45-400Hz230V 10-80kOhm
- Fabrikant:
- Dold
Subtotaal (1 eenheid)*
€ 282,58
(excl. BTW)
€ 341,92
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2 stuk(s) klaar voor verzending
- Plus verzending 2 stuk(s) vanaf 15 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 282,58 |
*prijsindicatie
- RS-stocknr.:
- 240-9033
- Fabrikantnummer:
- AI897 AC45-400Hz230V 10-80kOhm
- Fabrikant:
- Dold
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Dold | |
| Monitoring Application | Insulation | |
| Electrical Phase | 1, 3 | |
| Contact Configuration | SPDT | |
| Voltage Sensing Range | 0.8 → 1.1 V | |
| Mounting Type | DIN Rail | |
| Time Delay | <4.2s | |
| Series | AI 897 | |
| Width | 45mm | |
| Minimum Operating Temperature | -20°C | |
| Dimensions | 115 x 45 x 77mm | |
| Length | 115mm | |
| Operating Temperature Range | +60°C | |
| Maximum Operating Temperature | +60°C | |
| Height | 77mm | |
| Alles selecteren | ||
|---|---|---|
Merk Dold | ||
Monitoring Application Insulation | ||
Electrical Phase 1, 3 | ||
Contact Configuration SPDT | ||
Voltage Sensing Range 0.8 → 1.1 V | ||
Mounting Type DIN Rail | ||
Time Delay <4.2s | ||
Series AI 897 | ||
Width 45mm | ||
Minimum Operating Temperature -20°C | ||
Dimensions 115 x 45 x 77mm | ||
Length 115mm | ||
Operating Temperature Range +60°C | ||
Maximum Operating Temperature +60°C | ||
Height 77mm | ||
- Land van herkomst:
- DE
Insulation monitor for pure 3 phase and alternating current systems, AI897
Adjustable response value 10 → 80 kΩ
No separate auxiliary voltage connection required
1 changeover
Overall width 45 mm
No separate auxiliary voltage connection required
1 changeover
Overall width 45 mm
The AI897 insulation monitor displays the insulation resistance of unearthed 3 phase and alternating current systems to earth.
The device works according to the quiescent current principle, that is, the output relay responds when mains voltage is applied to terminals A1 → A2. The output relay breaks when the response setpoint is undercut.
A bridge between terminals LT1 and LT2 allows the AI897 to be programmed for memory storage behaviour; remove the bridge to programme hysteresis behaviour. The bridge can be replaced with a delete key with an NC contact. There is a PT test button on the front of the device to test for functional efficiency. An external test button (in accordance with VDE 0413) is also possible.
The device works according to the quiescent current principle, that is, the output relay responds when mains voltage is applied to terminals A1 → A2. The output relay breaks when the response setpoint is undercut.
A bridge between terminals LT1 and LT2 allows the AI897 to be programmed for memory storage behaviour; remove the bridge to programme hysteresis behaviour. The bridge can be replaced with a delete key with an NC contact. There is a PT test button on the front of the device to test for functional efficiency. An external test button (in accordance with VDE 0413) is also possible.
Gerelateerde Links
- Dold Insulation Monitoring Relay, SPDT, 0.8 → 1.1 V, DIN Rail
- Dold Frequency Monitoring Relay, SPDT, DIN Rail
- Dold Temperature Monitoring Relay, SPDT, DIN Rail
- Dold Thermistor Motor Protection Monitoring Relay, SPDT, DIN Rail
- Dold Speed Monitoring Relay, SPDT, DIN Rail
- Dold Phase Monitoring Relay, 3 Phase, SPDT, DIN Rail
- Dold Insulation Monitoring Relay, 1, 3 Phase, SPDT, 0 → 500V ac, DIN Rail
- Dold Cycle Monitoring Relay, SPDT, 230V ac, DIN Rail