Carlo Gavazzi NFC Reader

Bekijk alle Monitoring Relays

Subtotaal (1 eenheid)*

€ 205,46

(excl. BTW)

€ 248,61

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 13 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 205,46

*prijsindicatie

RS-stocknr.:
165-1485
Fabrikantnummer:
ACR1252U
Fabrikant:
Carlo Gavazzi
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Carlo Gavazzi

Series

ACR

Special Features

Supports Android 3.1 & Later, USB Firmware Upgradeability, USB Full Speed Interface

Terminal Type

PCB Pin

Operating Temperature Range

+50°C

Dimensions

98 x 65 x 12.8mm

Length

98mm

Maximum Operating Temperature

+50°C

Width

65mm

Height

12.8mm

Minimum Operating Temperature

0°C

Land van herkomst:
CN
The DPD Series settings can easily be modified through an Android App via a smartphone/tablet or via a USB NFC Reader/Writer connected to a computer. Under and over threshold settings can be set, as well as hysteresis and time delays. They are uploaded into the DPD Series by means of its NFC configuration. Neither potentiometer settings nor DIP switches are used for the device set-up, and after it is set-up, it can be password protected, to ensure safety while in use. The DPD02DM44B is delivered with default settings for North American 3-phase 240VAC mains, whereas the DPD02DM44 is delivered with European/Asian settings for 3-phase 400VAC mains.

3-phase voltage and frequency monitoring relay
Nominal measurement range from 177-552 VAC L-L and 102-318 VAC L-N
Star or Delta mains
NFC configuration
Adjustable set-points, hysteresis, delays, AND/OR logic
Three diagnostic LEDs
Operating frequency from 45 to 440Hz
Two independent SPDT 8 Amp outputs

Gerelateerde Links