RS PRO Voltage Monitoring Relay, 1 Phase, SPDT, DIN Rail
- RS-stocknr.:
- 102-6131
- Fabrikant:
- RS PRO
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
93 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 65,73
(excl. BTW)
€ 79,53
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 65,73 |
| 5 - 9 | € 63,09 |
| 10 - 24 | € 62,44 |
| 25 + | € 59,15 |
- RS-stocknr.:
- 102-6131
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
RS PRO Voltage Monitoring Relay With SPDT Contacts, 1 Phase, Overvoltage, Undervoltage
This monitoring relay from RS PRO trips a circuit breaker when the voltage supply drops too low or exceeds a certain level. It's used to prevent damage to equipment in the event of abnormal voltage conditions.
The microprocessor-based relay has red and green LED lights that allow you to clearly see the relay and supply status. To ensure safe operation, it senses undervoltage ranging from 173 V to 218 V and overvoltage ranging from 242 V to 288 V. It also allows for a time delay adjustment to prevent tripping from temporary dips in voltage.
The microprocessor-based relay has red and green LED lights that allow you to clearly see the relay and supply status. To ensure safe operation, it senses undervoltage ranging from 173 V to 218 V and overvoltage ranging from 242 V to 288 V. It also allows for a time delay adjustment to prevent tripping from temporary dips in voltage.
Features and Benefits
• SPDT (Single Pole Double Throw) contact configuration
• Dimensions of 66.5 (length) x 17.5 (width) x 89 mm (height)
• One phase
• Frequency sensing range of 48 to 63 Hz
• DIN rail mounting type
• One pole
• Operating temperature range of -20°C to +60°C
• Special features include two LEDs to indicate operational states, adjustment for time delay, adjustment for undervoltage trip level, microprocessor-based relay, monitoring of own supply to detect if it exceeds the set under or overvoltage trip levels, true RMS (rotronic monitoring system) monitoring
• Meets CE, EMC (electromagnetic compatibility), EN 61000-6 and IEC standards
• Supply voltage of 230 V AC
• Screw terminal type
• Time delay of 0.2 to 10 s
• Dimensions of 66.5 (length) x 17.5 (width) x 89 mm (height)
• One phase
• Frequency sensing range of 48 to 63 Hz
• DIN rail mounting type
• One pole
• Operating temperature range of -20°C to +60°C
• Special features include two LEDs to indicate operational states, adjustment for time delay, adjustment for undervoltage trip level, microprocessor-based relay, monitoring of own supply to detect if it exceeds the set under or overvoltage trip levels, true RMS (rotronic monitoring system) monitoring
• Meets CE, EMC (electromagnetic compatibility), EN 61000-6 and IEC standards
• Supply voltage of 230 V AC
• Screw terminal type
• Time delay of 0.2 to 10 s
Specificaties
Kenmerk | Waarde |
|---|---|
| Monitoring Application | Voltage |
| Electrical Phase | 1 |
| Contact Configuration | SPDT |
| Voltage Sensitivity | Overvoltage, Undervoltage |
| Mounting Type | DIN Rail |
| Time Delay | 0.2 → 10s |
| Frequency Sensing Range | 48 → 63Hz |
| Series | L |
| Width | 17.5mm |
| Maximum Operating Temperature | +60°C |
| Dimensions | 17.5 x 66.5 x 89mm |
| Minimum Operating Temperature | -20°C |
| Number of Poles | 1 |
| Special Features | 2 LEDs for the Indication of Operational States, Adjustment for Time Delay, Adjustment for Undervoltage Trip Level, Microprocessor Based Relay, Monitors Own Supply & Detects if The Supply Exceeds The Set Under or Over Voltage Trip Levels, True RMS Monitoring |
| Terminal Type | Screw |
| Operating Temperature Range | +60°C |
| Minimum Frequency Sensed | 48Hz |
| Length | 66.5mm |
| Height | 89mm |
| Maximum Frequency Sensed | 63Hz |