Microchip ATMEGA16U2-AU, 8 bit AVR, ATMEGA16U2 Microcontroller, 16 MHz, 16kB FLASH, 32-Pin TQFP

Bulkkorting beschikbaar

Subtotaal (1 verpakking van 2 eenheden)*

€ 6,54

(excl. BTW)

€ 7,92

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 10 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 128 stuk(s) vanaf 18 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
2 - 8€ 3,27€ 6,54
10 - 22€ 3,18€ 6,36
24 - 98€ 3,10€ 6,20
100 +€ 3,025€ 6,05

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
127-8282
Fabrikantnummer:
ATMEGA16U2-AU
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Product Type

Microcontroller

Series

ATMEGA16U2

Package Type

TQFP

Mount Type

Surface

Pin Count

32

Device Core

AVR

Data Bus Width

8bit

Interface Type

USART, SPI

Program Memory Size

16kB

Maximum Clock Frequency

16MHz

RAM Size

512bit

Maximum Supply Voltage

5.5V

Number of Programmable I/Os

22

Analogue Comparators

1

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Standards/Approvals

No

Width

7 mm

Length

7mm

Height

1.05mm

Minimum Supply Voltage

2.7V

Distrelec Product Id

304-29-290

Program Memory Type

FLASH

ADCs

8 x 10 Bit

Instruction Set Architecture

RISC

Automotive Standard

No

Number of Timers

2

Land van herkomst:
US
The Microchip ATmega16U2 CMOS 8-bit microcontroller is based the AVR enhanced RISC architecture. It operates on 2.7V to 5.5V voltage supply. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 16K bytes of in-system programmable flash with read-while-write capabilities, 512 Bytes EEPROM, 512 SRAM, 22 general purpose I/O lines, 32 general purpose working registers, two flexible Timer/Counters with compare modes and PWM, one USART, a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, debug wire interface, also used for accessing the On-chip Debug system and programming and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the oscillator, disabling all other chip functions until the next interrupt or hardware reset. In Standby mode, the Crystal/Resonator oscillator is running while the rest of the device is sleeping.

Up to 16 MIPS throughput at 16 Mhz

Programming lock for software security

Microcontroller reset on USB Bus reset without detach

USB Bus disconnection on microcontroller request

Master/Slave SPI Serial Interface

Programmable watchdog timer with separate on-chip oscillator

Power-On reset and programmable brown-out detection

Internal calibrated oscillator

External and internal interrupt sources

QFN32 (5x5mm) / TQFP32 packages

Gerelateerde Links