Microchip, 32bit ARM926EJ-S, SAM9X72 Microcontroller, 800MHz, 128 kB SRAM, 427-Pin TFBGA

The KQ2 one-touch bulkhead adaptors are used to connect male thread and tube through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure without reducing the flow. When the adaptor is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.

Thread-to-tube adaptor
Easy installation in confined spaces as the body and threaded portion can rotate separately
Sealant coated threads minimise assembly time
The special profile design of the seal provides positive sealing under pressure without reduced flow
Release button allows tube to be removed easily without damage
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 to 40°C)

Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated).

The Microchip High-performance, Arm Cortex-A7 CPU-based embedded microprocessor (MPU) running up to 1 GHz with 1 Gbit integrated DDR3L SDRAM. It support flexible boot options from octal/quad SPI, SD/eMMC as well as 8-bit SLC/MLC NAND Flash. Feature a large number of connectivity options including Dual Ethernet (one Gigabit Ethernet and one 10/100 Ethernet), six CAN-FD and three high-speed USB. Advanced security functions like secure boot, secure key storage, high-performance crypto accelerators for AES, SHA, RSA and ECC are also supported.

ARM Trust Zone
FIPS compliant TRNG plus 11 kB OTP for key storage
On-the-fly encryption/decryption of external memories

Bulkhead Adapators