ABB S200M S202M Circuit Breaker, 2-Pole, 4A, Type K, 440V ac AC, 440 V dc DC, 10 kA Breaking Capacity

RS-stocknr.:: 287-6363
Artikelnummer Distrelec:: 302-42-358
Fabrikantnummer:: 2CDS272061R0337
Fabrikant:: ABB

ABB S200M S202M Circuit Breaker, 2-Pole, 4A, Type K, 440V ac AC, 440 V dc DC, 10 kA Breaking Capacity

Bekijk alle MCBs

Subtotaal (1 eenheid)*

€ 114,83

(excl. BTW)

€ 138,94

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 9 stuk(s) vanaf 05 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 114,83

*prijsindicatie

RS-stocknr.:: 287-6363
Artikelnummer Distrelec:: 302-42-358
Fabrikantnummer:: 2CDS272061R0337
Fabrikant:: ABB

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Product Type	Circuit Breaker
	Number of Poles	2
	Current Rating	4A
	Tripping Characteristics	Type K
	Rated AC Voltage	440V ac
	Rated DC Voltage	440V dc
	Breaking Capacity	10kA
	Mount Type	Rail
	Range	S200M
	Series	S202M
	Terminal Type	Screw
	IP Rating	IP40, IP20
	Height	88mm
	Depth	69mm
	Standards/Approvals	UL 1077, IEC/EN 60947-2, IEC/EN 60898-1, CSA 22.2 No. 235
	Width	2mm
	Tripping Mechanism	Electromechanic, Anaerobic Adhesive

	Alles selecteren
	Merk ABB
	Product Type Circuit Breaker
	Number of Poles 2
	Current Rating 4A
	Tripping Characteristics Type K
	Rated AC Voltage 440V ac
	Rated DC Voltage 440V dc
	Breaking Capacity 10kA
	Mount Type Rail
	Range S200M
	Series S202M
	Terminal Type Screw
	IP Rating IP40, IP20
	Height 88mm
	Depth 69mm
	Standards/Approvals UL 1077, IEC/EN 60947-2, IEC/EN 60898-1, CSA 22.2 No. 235
	Width 2mm
	Tripping Mechanism Electromechanic, Anaerobic Adhesive

Land van herkomst:: DE

ABB S200 M UC Series Circuit Breaker, 4A Current, 440V Rated AC Voltage - 2CDS272061R0337

This circuit breaker provides overcurrent protection for two-pole installations in electrical systems. It is designed for DIN-rail mounting and offers manual reclosure via a toggle reset actuator. The device is intended for use where Compact protection and straightforward screw-terminal connections are required.

Features and Benefits:

• 10kA breaking capacity enhances fault interruption capability
• Type K tripping delivers selective response to overloads
• 2-pole configuration enables simultaneous isolation of both conductors
• Screw terminals allow robust conductor termination and maintenance
• IP40 and IP20 ratings offer Basic ingress protection in panel environments

Applications

• Suitable for control panels requiring Compact overcurrent protection
• Ideal for DC bus protection up to 440V d.c. systems
• Used with AC distribution at voltages up to 440V a.c.
• Can be used for machinery secondary circuits needing selective tripping
• Suitable for installations on standard DIN-rail assemblies

What is the rated current and how does it affect circuit selection?

The device is rated at 4A and should be chosen to match expected load currents while providing a protective margin.

Which mounting method is required for installation?

It is designed for DIN-rail mounting to fit standard control panel rails.

How are conductors connected to the device?

Connections are MADE via screw-type terminals for secure wiring termination.

What reset method is provided after a trip event?

A toggle actuator permits manual reset following an interruption.