ABB S200M S202M Circuit Breaker, 2-Pole, 6A, Type B, 440V ac AC, 500 V dc DC, 10 kA Breaking Capacity

RS-stocknr.:: 287-6362
Artikelnummer Distrelec:: 303-11-517
Fabrikantnummer:: 2CDS272061R0065
Fabrikant:: ABB

ABB S200M S202M Circuit Breaker, 2-Pole, 6A, Type B, 440V ac AC, 500 V dc DC, 10 kA Breaking Capacity

Bekijk alle MCBs

Subtotaal (1 eenheid)*

€ 126,55

(excl. BTW)

€ 153,13

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

4 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 126,55

*prijsindicatie

RS-stocknr.:: 287-6362
Artikelnummer Distrelec:: 303-11-517
Fabrikantnummer:: 2CDS272061R0065
Fabrikant:: ABB

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Number of Poles	2
	Product Type	Circuit Breaker
	Current Rating	6A
	Tripping Characteristics	Type B
	Rated AC Voltage	440V ac
	Rated DC Voltage	500V dc
	Breaking Capacity	10kA
	Mount Type	DIN Rail
	Range	S200M
	Series	S202M
	Terminal Type	Screw
	IP Rating	IP40, IP20
	Height	88mm
	Standards/Approvals	UL 1077, IEC/EN 60947-2, IEC/EN 60898-1, CSA 22.2 No. 235
	Depth	69mm
	Width	35mm
	Tripping Mechanism	Electromechanic, Anaerobic Adhesive

	Alles selecteren
	Merk ABB
	Number of Poles 2
	Product Type Circuit Breaker
	Current Rating 6A
	Tripping Characteristics Type B
	Rated AC Voltage 440V ac
	Rated DC Voltage 500V dc
	Breaking Capacity 10kA
	Mount Type DIN Rail
	Range S200M
	Series S202M
	Terminal Type Screw
	IP Rating IP40, IP20
	Height 88mm
	Standards/Approvals UL 1077, IEC/EN 60947-2, IEC/EN 60898-1, CSA 22.2 No. 235
	Depth 69mm
	Width 35mm
	Tripping Mechanism Electromechanic, Anaerobic Adhesive

Land van herkomst:: DE

ABB S200 M UC Series Circuit Breaker, 6A Current, 500V dc Rated Voltage - 2CDS272061R0065

This circuit-breaker is a Compact protective device designed for DIN-rail distribution installations where overcurrent protection and manual reset are required. It provides two-pole interruption with a toggle reset actuator and is intended for use in both DC and AC circuits within electrical panels. The product meets several international approval standards and is configured for screw-terminal connections on standard mounting rails.

Features and Benefits:

• 10kA breaking capacity provides robust fault interruption
• Type B tripping characteristic protects against low fault currents
• 2-pole configuration ensures simultaneous disconnection of both conductors
• 440V AC rating supports a wide range of alternating-current systems
• Toggle reset actuator enables simple manual restoration after trip

Applications

• Suitable for control-panel branch protection in DC systems
• Ideal for photovoltaic inverter string isolation up to 500V dc
• Used with motor control circuits requiring Type B protection
• Applicable in modular automation racks on DIN rail

What Terminal connection method does it use?

It employs screw terminals for secure conductor clamping and straightforward wiring.

How is it mounted within an electrical enclosure?

The device clips onto a DIN rail for Rapid installation and removal.

What environmental ingress levels are specified?

It carries IP40 and IP20 ratings indicating protection levels for enclosure‑installed equipment.

Which approvals cover its safety and interoperability?

It is approved to UL 1077, IEC/EN 60947-2, IEC/EN 60898-1, and CSA 22.2 No.235.