ABB System Pro M Compact S200 M UC Miniature Circuit Breaker, 2-Pole, 16A, Type K, 400V ac AC, 440 V dc DC, 10 kA

This miniature circuit breaker is intended to protect electrical circuits against overloads and short circuits in Compact installations. It is suited to DIN-rail mounting and provides two-pole protection with a toggle reset actuator, enabling straightforward manual reclosure. The unit is designed for environments where alternating and direct voltage protection is required, and it complies with recognised international safety standards.

• 16A current rating provides controlled overcurrent interruption
• 10kA breaking capacity limits fault energy during short circuits
• Type K tripping ensures selective response to motor-type loads
• Screw terminals permit secure conductor connection without accessories
• Rated 440Vdc and 400Vac support mixed DC and AC systems

• Suitable for industrial control panel circuit protection
• Ideal for protecting DC battery-linked circuits
• Used with machinery feeding motor loads requiring selectivity
• Used for retrofit installations on standard DIN rail

It provides two poles to isolate both conductors in a circuit simultaneously.

It clips onto a DIN rail for Rapid panel assembly and removal.

The device carries IP20 and IP40 ratings for ordinary indoor protection.

Screw-type terminals are used to secure incoming and outgoing conductors.

It is approved to IEC/EN 60947-2, UL1077 and CSA 22.2 No.235.