Megger LRCD220-FR Loop Impendence & RCD Combined Tester, Loop Impedance Test Type 2 Wire 500V, RCD Test Type AC, DC, RCD

RS-stocknr.:: 537-7923
Fabrikantnummer:: LRCD220-FR
Fabrikant:: Megger

Megger LRCD220-FR Loop Impendence & RCD Combined Tester, Loop Impedance Test Type 2 Wire 500V, RCD Test Type AC, DC, RCD

Subtotaal (1 eenheid)*

€ 1.170,00

(excl. BTW)

€ 1.415,70

(incl. BTW)

Voeg 1 eenheid toe voor gratis bezorging

Bestellingen onder € 75,00 (excl. BTW) € 5,95.

Tijdelijk niet op voorraad

Verzending vanaf 09 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.170,00

*prijsindicatie

RS-stocknr.:: 537-7923
Fabrikantnummer:: LRCD220-FR
Fabrikant:: Megger

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Megger
	Product Type	Loop Impendence & RCD Combined Tester
	Test Equipment Type	Combined Loop and RCD Tester
	Loop Impedance Test Type	2 Wire
	Maximum Voltage Measurement	500V
	RCD Test Type	AC, DC
	PSC Display	Yes
	RCD Test Current	1000mA
	Non-Trip Loop Test	Yes
	Display Type	LCD
	Loop Test Accuracy	±2 %
	Battery Type	AA
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	40°C
	Power Source	Battery
	Weight	980g
	Standards/Approvals	IEC 61326-1
	Width	148 mm
	Height	203mm
	Length	203mm
	Safety Category Voltage	300V
	Safety Category Level	CAT III

	Alles selecteren
	Merk Megger
	Product Type Loop Impendence & RCD Combined Tester
	Test Equipment Type Combined Loop and RCD Tester
	Loop Impedance Test Type 2 Wire
	Maximum Voltage Measurement 500V
	RCD Test Type AC, DC
	PSC Display Yes
	RCD Test Current 1000mA
	Non-Trip Loop Test Yes
	Display Type LCD
	Loop Test Accuracy ±2 %
	Battery Type AA
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 40°C
	Power Source Battery
	Weight 980g
	Standards/Approvals IEC 61326-1
	Width 148 mm
	Height 203mm
	Length 203mm
	Safety Category Voltage 300V
	Safety Category Level CAT III

Vrijgesteld

Land van herkomst:: GB

Megger Loop Impedance and RCD Combined Tester, 10mA to 1000mA RCD Test Current Range, Armoured Rubber Case - LRCD200 Series - LRCD220-FR

Make sure your electrical safety systems are in top-notch condition with this loop impedance and RCD combined tester from Megger. Its no-trip feature means you can check all devices over 30mA without accidental activation. The handy instrument can also read the trip time of your RCD to ensure it reacts quickly to fault currents, with an auto-test function letting you focus on the breaker during the process. For additional peace of mind, you can perform 2-wire fast testing, phase-to-phase and phase-to-earth measurements on this versatile device.

Features & Benefits

• RCD test current range of 10mA to 1000mA gives you a broad scope

• IP54 rating demonstrates protection against water sprays for a weatherproof unit

• Integrated voltmeter lets you read voltage levels

• Backlit display for convenient viewing in low-light settings

Applications

• Electrical engineering

• Security systems

• Control panels

• Lighting fixtures

How does earth loop impedance testing work?

Testers like this one measure the impedance of the electrical loop by releasing a test current to the circuit. This tells you if the system can deliver enough current to activate the fuse in case of electrical faults and disconnect quickly enough to prevent a fire outbreak.