Fluke 709H, Multi Function Calibrator - UKAS Calibration

Bekijk alle Loop Calibrators

Subtotaal (1 eenheid)*

€ 2.317,16

(excl. BTW)

€ 2.803,76

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Beperkte voorraad
  • Plus verzending 2 stuk(s) vanaf 02 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 2.317,16

*prijsindicatie

RS-stocknr.:
776-4815
Fabrikantnummer:
Fluke-709H
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Model Number p

709H

Calibrated

UKAS

Battery Type

Rechargeable NiMH

Battery Life

20 h

Power Source

Battery

Weight

1.1kg

Height

150mm

Length

183mm

Maximum Operating Temperature

+40°C

Minimum Operating Temperature

-10°C

Width

114mm

N.v.t.

Land van herkomst:
US

Fluke Precision Loop Calibrator


The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.

Features and Benefits


Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use

LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)

Best in class accuracy at 0.01% reading

Simple 2-wire connection for all measurements and protection up to 240VAC

User-selectable 250ohms resistor

Dedicated span and 25% step buttons

24VDC loop power with mA measure mode (-25% to 125%)

Resolution of 1μA on mA ranges and 1mV on voltage ranges

Variable step and ramp time in seconds

Adjustable span selection (0mA to 20mA or 4mA to 20mA)

Small (150mmx90mmx30mm), light (300g) and robust design

Powered by 6 standard AAA batteries (supplied installed)

Auto shutdown to conserve battery life (adjustable up to 30 minutes)

Protective holster (supplied) fits easily into user's hand

Includes built in selectable 250 Ω resistor for HART communication

Provides intuitive user interface with Quick-Set knob for fast setup

Applications


Process control automation

Manufacturing

Instrumentation

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Gerelateerde Links