Martindale TEK 300 Loop Calibrator Battery
- RS-stocknr.:
- 203-293
- Fabrikantnummer:
- TEK300
- Fabrikant:
- Martindale
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 203-293
- Fabrikantnummer:
- TEK300
- Fabrikant:
- Martindale
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Martindale | |
| Product Type | Loop Calibrator | |
| Model Number | TEK 300 | |
| Resolution | 10 μA | |
| Battery Type | AA | |
| Power Source | Battery | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Length | 180mm | |
| Weight | 380g | |
| Width | 100 mm | |
| Height | 44mm | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Alles selecteren | ||
|---|---|---|
Merk Martindale | ||
Product Type Loop Calibrator | ||
Model Number TEK 300 | ||
Resolution 10 μA | ||
Battery Type AA | ||
Power Source Battery | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Length 180mm | ||
Weight 380g | ||
Width 100 mm | ||
Height 44mm | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Vrijgesteld
Martindale Direct Current Calibrator
The Martindale direct current calibrator is able to sink or source a current up to 20mA. It is intended for process control instrumentation and general purpose signal
injection applications. It has a monitor mode facility incorporated into the design, whereby the current (0mA to 20mA) in the process loop can be monitored and read directly from the digital display. This device is also fully protected against inadvertent misuse. This low-cost unit offers exceptional value for money means of delivering and measuring current ranging between 0mA and 20mA currents. This makes it ideal for cost-effective application in testing, calibrating and troubleshooting in a wide range of process control environments.
Features and Benefits
Sink, source and monitor modes ranging between 0mA and 20mA F. S. (+0.1%)
DC/DC converter output of 28.5V (+0.1V)
Resolution of 10μA
Overload protection for additional safety
ABS case with clear three digit LCD display
Temperature drift 150ppm°C
Linearity of 0.15%
Output noise (typically) of 4mV p/p
Battery condition and error indication LEDs
Requires two PP3 alkaline batteries
Capable of withstanding DC voltages up to 50V but can be damaged by AC input
Operating temperature ranges between 0°C and 50°C
Applications
Process control automation
Manufacturing
Instrumentation
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
Gerelateerde Links
- Martindale TEK 300 Loop Calibrator Battery
- Fluke 709 Loop Calibrator Battery
- Fluke 709H Loop Calibrator Battery
- Time Electronics 7006 Loop Calibrator Battery
- Time Electronics 7007 Loop Calibrator Battery
- Time Electronics 1048 Loop Calibrator Battery
- Fluke 707 Loop Calibrator Battery 30V
- Fluke 705 Loop Calibrator Battery 30V