SKF PHF FX51-25X50, 25mm ID, 50 mm OD Coupler, 34 mm, 420 Nm
- RS-stocknr.:
- 268-9926
- Fabrikantnummer:
- PHF FX51-25X50
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 16,15
(excl. BTW)
€ 19,54
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 08 maart 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 16,15 |
*prijsindicatie
- RS-stocknr.:
- 268-9926
- Fabrikantnummer:
- PHF FX51-25X50
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Torque Rating | 420Nm | |
| Product Type | Coupler | |
| Bore Diameter | 25mm | |
| Length | 34mm | |
| Series | FX51 | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Torque Rating 420Nm | ||
Product Type Coupler | ||
Bore Diameter 25mm | ||
Length 34mm | ||
Series FX51 | ||
Standards/Approvals No | ||
- Land van herkomst:
- CN
The SKF bushing and hub is available in many variant, offering specific benefit in power transmission application ranging from automotive to papermaking. This bushing is designed to attach component to shaft using a 360-degree interference fit, with no keyway required, the shaft size can usually be reduced and only minimal machining is required. Installation is as simple as sliding the bushing into place and tightening it with the clamp screw.
Manufactured according to established market standard
Available in a wide range of metric and imperial bore size
Easily installed and removed using basic tool
True zero backlash
Reduced machining and material cost
Gerelateerde Links
- SKF PHF FX51-30X55, 30mm ID, 55 mm OD Coupler, 34 mm, 500 Nm
- SKF PHF FX10-25X50, 25mm ID, 50 mm OD Coupler, 27.5 mm, 380 Nm
- SKF PHF FX40-25X50, 25mm ID, 50 mm OD Coupler, 48 mm, 680 Nm
- SKF PHF FX41-40X65, 40mm ID, 65 mm OD Coupler, 34 mm, 1210 Nm
- SKF PHF FX41-30X55, 30mm ID, 55 mm OD Coupler, 34 mm, 660 Nm
- Ringfeder 7012 - 25x50, 25mm ID, 50 mm OD Locking Assembly, 27.5 mm
- SKF PHF FX50-35X60, 35mm ID, 60 mm OD Coupler, 48 mm, 890 Nm
- SKF PHF FX41-45X75, 45mm ID, 75 mm OD Coupler, 41 mm, 2200 Nm