Igus W Series, WS-10-40-1000, Linear Guide Rail 40 mm width 1000 mm Length
- RS-stocknr.:
- 488-5243
- Fabrikantnummer:
- WS-10-40-1000
- Fabrikant:
- Igus
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 104,12
(excl. BTW)
€ 125,99
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending
- 43 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 104,12 |
| 5 - 9 | € 99,98 |
| 10 + | € 97,88 |
*prijsindicatie
- RS-stocknr.:
- 488-5243
- Fabrikantnummer:
- WS-10-40-1000
- Fabrikant:
- Igus
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Igus | |
| Product Type | Linear Guide Rail | |
| Rail Width | 40mm | |
| Rail Length | 1000mm | |
| Series | W | |
| Material | Hard Anodised Aluminium, Stainless Steel | |
| Static Load Rating | 4800N | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Igus | ||
Product Type Linear Guide Rail | ||
Rail Width 40mm | ||
Rail Length 1000mm | ||
Series W | ||
Material Hard Anodised Aluminium, Stainless Steel | ||
Static Load Rating 4800N | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- DE
Igus Series T Linear Guide Rail, 20mm Rail Width, 1000mm Rail Length - TS-01-20-1000
This linear guide rail is designed to provide precise linear motion support in industrial assemblies, offering a robust solution for guided movement in automation and mechanical systems. Constructed from anodised aluminium, it delivers corrosion-resistant guidance suitable for integration into equipment requiring dependable linear travel over a metre length.
Features and Benefits:
• Static load capacity 7.4 kN enabling high-load support
• Rail width 20mm offering compact guidance footprint
• Rail length 1000mm allowing extended straight travel
• Anodised aluminium finish resisting surface wear
• Designed for linear motion systems improving positional accuracy
• Rail width 20mm offering compact guidance footprint
• Rail length 1000mm allowing extended straight travel
• Anodised aluminium finish resisting surface wear
• Designed for linear motion systems improving positional accuracy
Applications
• Suitable for pick-and-place gantries in automation cells
• Ideal for conveyor alignment and guiding modules
• Used for slide mechanisms in electrical assembly rigs
• Can be used for linear stages in test and measurement setups
• Ideal for conveyor alignment and guiding modules
• Used for slide mechanisms in electrical assembly rigs
• Can be used for linear stages in test and measurement setups
What construction material affects corrosion resistance?
The rail is made from anodised aluminium, which provides a protective oxide layer that improves surface hardness and resistance to environmental wear.
How much static load can the rail support for stationary loads?
It can withstand a static load of 7.4 kN, which defines the maximum sustained load it can carry without permanent deformation.
What form factor should designers allow for mounting runs?
The rail has a nominal width of 20 mm, so mounting interfaces and carriage widths should be specified to accommodate this cross-section.
What length options does this product provide for straight guidance?
This variant is supplied as a 1000mm rail, suitable where metre-long guidance is required.
Gerelateerde Links
- Igus W Series, WS-16-1000, Linear Guide Rail 27 mm width 1000 mm Length
- Igus W Series, WS-20-1000, Linear Guide Rail 27 mm width 1000 mm Length
- Igus W Series, WS-10-1000, Linear Guide Rail 27 mm width 1000 mm Length
- Igus W Series, WS-20-80-1000, Linear Guide Rail 74 mm width 1000 mm Length
- Igus W Series, WS-10-80-1000, Linear Guide Rail 74 mm width 1000 mm Length
- Igus W Series, WS-16-60-1000, Linear Guide Rail 54 mm width 1000 mm Length
- Igus W Series, WS-10-40-300, Linear Guide Rail 40 mm width 300 mm Length
- Igus W Series, WS-10-40-600, Linear Guide Rail 40 mm width 600 mm Length