Igus Linear Guide Carriage NW-02-40 DryLin N Series, 400 N Dynamic Load

RS-stocknr.:: 448-5411
Fabrikantnummer:: NW-02-40
Fabrikant:: Igus

Igus Linear Guide Carriage NW-02-40 DryLin N Series, 400 N Dynamic Load

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 12,56

(excl. BTW)

€ 15,20

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

52 stuk(s) klaar voor verzending
513 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 12,56
5 - 9	€ 12,07
10 +	€ 11,82

*prijsindicatie

RS-stocknr.:: 448-5411
Fabrikantnummer:: NW-02-40
Fabrikant:: Igus

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Igus
	Product Type	Linear Guide Carriage
	Series	DryLin N
	Carriage Length	50mm
	Carriage Width	23mm
	Dynamic Load Rating	400N
	Static Load Rating	700N
	Carriage Type	Slider
	Acceptable Rail Width	80mm
	Standards/Approvals	DIN 7984, DIN 84, EN ISO 1707, DIN 6912

	Alles selecteren
	Merk Igus
	Product Type Linear Guide Carriage
	Series DryLin N
	Carriage Length 50mm
	Carriage Width 23mm
	Dynamic Load Rating 400N
	Static Load Rating 700N
	Carriage Type Slider
	Acceptable Rail Width 80mm
	Standards/Approvals DIN 7984, DIN 84, EN ISO 1707, DIN 6912

Vrijgesteld

Land van herkomst:: DE

Igus DryLin R Series Bearing, 16mm Inside Diameter, 26mm Outside Diameter - RJUM-01-16

This bearing is a closed-end linear bearing intended for guiding shafts in automation and mechanical assemblies. It combines a compact aluminium body with a design suited to linear motion applications where a sealed end and defined centreline offset are required. The component is designed for industry use where solid radial support and integration into linear systems are needed.

Features and Benefits:

• 10080N static capacity provides sustained support under high preload
• 1440N dynamic rating enables continuous motion loads
• 13mm base-to-bore centreline ensures consistent alignment
• Aluminium construction reduces mass for moving assemblies
• Closed-end design prevents shaft overtravel and ingress
• 36mm overall length allows compact carriage integration

Applications

• Suitable for linear guideways in pick-and-place units
• Ideal for actuator shafts in control panels and enclosures
• Used for supporting guide rods in conveyor modules
• Can be used for motion stages in test rigs
• Used with sliding elements in compact automation cells

What shaft size does it accept?

It accepts shafts with a 16mm internal bore to ensure a snug rotational fit.

How does the outside dimension affect mounting?

The 26mm external diameter determines bore size for housings and press-fit tolerances.

Is the end configuration suitable for particulate environments?

The closed-end configuration limits entry of debris from one end, reducing contamination risk at the shaft terminus.

What material properties influence thermal behaviour?

The aluminium body offers good thermal conductivity and low mass, affecting heat transfer and inertia in moving systems.