Igus Linear Guide Carriage TW-01-15 drylin T Series

RS-stocknr.:: 415-2587
Fabrikantnummer:: TW-01-15
Fabrikant:: Igus

Igus Linear Guide Carriage TW-01-15 drylin T Series

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 78,18

(excl. BTW)

€ 94,60

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

11 stuk(s) klaar voor verzending
121 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 78,18
5 - 9	€ 75,06
10 +	€ 73,50

*prijsindicatie

RS-stocknr.:: 415-2587
Fabrikantnummer:: TW-01-15
Fabrikant:: Igus

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Igus
	Product Type	Linear Guide Carriage
	Series	drylin T
	Carriage Length	74mm
	Carriage Width	47mm
	Static Load Rating	4kN
	Carriage Material	Aluminium
	Carriage Type	Linear
	Standards/Approvals	ISO Class 6 according to DIN EN ISO 14644-1, ISO Class 5, SEMI E78-0998 (level 1), ISO Class 3

	Alles selecteren
	Merk Igus
	Product Type Linear Guide Carriage
	Series drylin T
	Carriage Length 74mm
	Carriage Width 47mm
	Static Load Rating 4kN
	Carriage Material Aluminium
	Carriage Type Linear
	Standards/Approvals ISO Class 6 according to DIN EN ISO 14644-1, ISO Class 5, SEMI E78-0998 (level 1), ISO Class 3

Vrijgesteld

Land van herkomst:: DE

Igus TRL Series Cable Trunking, 1m Length, 45mm Width - TRL.40.058.0

This cable trunking provides organised routing and protection for cables in industrial and automation environments. It is constructed from a specialised polymer to resist fire propagation and is delivered in a one-metre length suitable for inline runs and retrofit installations. The product is finished in a dark colour for unobtrusive installation in equipment racks and factory layouts.

Features and Benefits:

• Flame-retardant material reduces fire spread risk and enhances safety
• Self-extinguishing behaviour limits ignition after heat source removal
• Integrated strain relief secures cables and reduces connector stress
• Certified to UL94 V-2 for recognised flammability performance
• Compliant with VDE 0304 IIC for electrical safety assessment
• Minimum bend radius 58mm to preserve cable integrity during bends

Applications

• Suitable for cable routing in automated assembly lines
• Ideal for electrical control cabinet installations
• Used for protecting harnesses in mechanical machinery
• Can be used for wiring runs in electronics test benches
• Suitable for retrofitting cable management in factory upgrades

What material properties support thermal resistance during faults?

The trunking is made from a polymer compound formulated to resist flame spread and to self-extinguish once the heat source is removed, reducing heat transfer along the run.

How does the built-in strain relief affect connector lifetime?

The integrated strain relief transfers mechanical loads away from terminations, lowering cyclic stress on connectors and extending service intervals.

What routing constraints should be observed for tight installations?

Maintain a bend radius no smaller than 58mm to avoid deformation or increased insertion loss for sensitive signal cables.

How long is each unit and how does that impact run planning?

Each section measures 1m in length, facilitating straightforward calculation of quantities for linear runs and modular assembly.

Note

Carriages and rails sold seperately.