STMicroelectronics L6362ATR Line Transceiver, 12-Pin VFDFPN
- RS-stocknr.:
- 163-9771P
- Fabrikantnummer:
- L6362ATR
- Fabrikant:
- STMicroelectronics
Subtotaal 5 eenheden (geleverd op een doorlopende strip)*
€ 11,38
(excl. BTW)
€ 13,77
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending 2.840 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 5 + | € 2,276 |
*prijsindicatie
- RS-stocknr.:
- 163-9771P
- Fabrikantnummer:
- L6362ATR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| IC Type | Line Transceiver IC | |
| Input Type | Single Ended | |
| Number of Transmitters | 1 | |
| Mounting Type | Surface Mount | |
| Package Type | VFDFPN | |
| Pin Count | 12 | |
| Dimensions | 3 x 3 x 0.95mm | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
IC Type Line Transceiver IC | ||
Input Type Single Ended | ||
Number of Transmitters 1 | ||
Mounting Type Surface Mount | ||
Package Type VFDFPN | ||
Pin Count 12 | ||
Dimensions 3 x 3 x 0.95mm | ||
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment.
Fully protected
Reverse polarity
Overload with cut-off function
Overtemperature
Undervoltage and overvoltage
GND and VCC open wire
-40 to +125 °C operating ambient temperature
Selectable output stages:high-side, low-side, push-pull
Suitable to drive L, C and R loads
30 μF output load drive capability
Switching capability of inductors up to 500 mJ
Wake-up detection supported
Fast demagnetization of inductive loads
Reverse polarity
Overload with cut-off function
Overtemperature
Undervoltage and overvoltage
GND and VCC open wire
-40 to +125 °C operating ambient temperature
Selectable output stages:high-side, low-side, push-pull
Suitable to drive L, C and R loads
30 μF output load drive capability
Switching capability of inductors up to 500 mJ
Wake-up detection supported
Fast demagnetization of inductive loads