STMicroelectronics L6360, Line Transceiver, I2C, 18 → 32.5 V, 26-Pin VFQFPN
- RS-stocknr.:
- 163-9761P
- Fabrikantnummer:
- L6360
- Fabrikant:
- STMicroelectronics
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 163-9761P
- Fabrikantnummer:
- L6360
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Number of Transmitters | 1 | |
| Mounting Type | Surface Mount | |
| Package Type | VFQFPN | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -40 °C | |
| Pin Count | 26 | |
| Dimensions | 3.5 x 5 x 0.95mm | |
| Height | 0.95mm | |
| Length | 3.5mm | |
| Width | 5mm | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Number of Transmitters 1 | ||
Mounting Type Surface Mount | ||
Package Type VFQFPN | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -40 °C | ||
Pin Count 26 | ||
Dimensions 3.5 x 5 x 0.95mm | ||
Height 0.95mm | ||
Length 3.5mm | ||
Width 5mm | ||
The L6360 is a monolithic IO-Link master port supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The C/QO output stage is programmable: high-side, low-side or push-pull, also cut-off current, cut-off current delay time, and restart delay are programmable. Cut-off current and cut-off current delay time, combined with thermal shutdown and automatic restart, protect the device against overload and short-circuit. C/QO and L+ output stages are able to drive resistive, inductive and capacitive loads.
Supply voltage from 18 V to 32.5 V
Programmable output stages:high-side, low-side or push-pull (< 2 Ω)
Up to 500 mA L+ protected high-side driver
COM1, COM2 and COM3 mode supported
Additional IEC61131-2 type 1 input
Short-circuit and overcurrent output protection through current limitation and programmable cut-off current
Programmable output stages:high-side, low-side or push-pull (< 2 Ω)
Up to 500 mA L+ protected high-side driver
COM1, COM2 and COM3 mode supported
Additional IEC61131-2 type 1 input
Short-circuit and overcurrent output protection through current limitation and programmable cut-off current
Gerelateerde Links
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,