Honeywell LS Series Roller Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

RS-stocknr.:: 217-7116
Fabrikantnummer:: 5LS1-4PG
Fabrikant:: Honeywell

Honeywell LS Series Roller Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

Subtotaal (1 eenheid)*

€ 506,17

(excl. BTW)

€ 612,47

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

12 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 506,17

*prijsindicatie

RS-stocknr.:: 217-7116
Fabrikantnummer:: 5LS1-4PG
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	10A
	Series	LS
	Switching AC Voltage	240V
	Minimum Operating Temperature	-29°C
	Maximum Operating Temperature	+120°C
	Width	40mm
	Depth	40mm
	Length	102.7mm
	Standards/Approvals	RoHS
	Hazardous Area Certification	NO
	Operating Force	31.4N
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles
	Mounting Orientation	Side

	Alles selecteren
	Merk Honeywell
	Product Type Limit Switch
	Actuator Type Roller Plunger
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 10A
	Series LS
	Switching AC Voltage 240V
	Minimum Operating Temperature -29°C
	Maximum Operating Temperature +120°C
	Width 40mm
	Depth 40mm
	Length 102.7mm
	Standards/Approvals RoHS
	Hazardous Area Certification NO
	Operating Force 31.4N
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles
	Mounting Orientation Side

Honeywell Limit Switch, 20mm Conduit Entry, Roller Plunger Actuator - 5LS1-4PG

This limit switch is a Compact electromechanical actuator designed to detect position changes and provide a discrete control signal in industrial systems. It is intended for side-mounted applications where a roller plunger actuator is required and where environmental protection and electrical switching capacity must be balanced for routine automation, electrical control and mechanical Interface tasks.

Features and Benefits:

• Roller plunger actuator delivers positive mechanical engagement
• SPDT snap-action contacts allow fast reliable switching
• Switching rating 10A at 480V provides high load capability
• IP67 enclosure offers protection in wet and dusty environments
• Rated for -10 to 80°C operation supports varied ambient conditions
• Mechanical life of 10 million cycles minimises replacement frequency

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for machine guards and interlock position sensing
• Used for limit feedback on pneumatic and hydraulic actuators
• Can be used for panel-mounted control in harsh environments
• Used with motor starters where high AC switching is required

What electrical connection method is provided for installation?

The device uses screw terminals for secure wiring termination and is designed for a 20mm conduit entry to integrate with standard conduit systems.

What materials contribute to the enclosure’s robustness?

The housing is MADE from die-cast zinc which provides mechanical strength and resistance to impact in industrial settings.

How is mounting orientation handled on machinery?

It is configured for side mounting to allow lateral actuation by cams, levers or moving machine parts.

What contact Action Can I expect during switching events?

The internal contacts use a snap-action mechanism to ensure Rapid make/break transitions for dependable control signalling.