Honeywell Technologies GLE Series Adjustable Roller Lever Limit Switch, 1 NC/1 NO, IP67, Die Cast Zinc Housing, 240V ac,

This limit switch is a rugged electromechanical device designed to detect position changes and actuate control circuits in industrial settings. It employs a roller-lever actuator to translate mechanical motion into electrical switching and is suited to applications where robust environmental protection and clear changeover signals are required.

• IP67 rated enclosure keeps components sealed during washdown
• Snap-action contacts deliver fast switching for precise control
• Dual contact arrangement provides normally closed and normally open outputs
• Electrostatic epoxy-coated zinc housing resists harsh workplace conditions
• Operating range from -40 to 85°C supports extreme temperature environments
• Mechanical endurance of 10,000,000 cycles reduces replacement frequency

• Suitable for conveyor end-of-travel sensing in manufacturing lines
• Ideal for limit detection on automated material-handling equipment
• Used with safety interlocks on machine access panels
• Can be used for actuator position feedback in pneumatic systems

It is rated to switch AC loads up to 240V AC at 6 A and DC loads up to 250V DC, suitable for many control and pilot circuits.

It is designed for side mounting and accepts cable entry via a PG13.5 conduit entry for straightforward conduit or gland connection.

The snap-action contact mechanism produces Rapid contact transition for dependable signalling under dynamic conditions.

The metal enclosure finished with an electrostatic epoxy coating and robust actuator components combine to deliver high mechanical life and durability under repeated operation.

UL/ UL listed for Canada

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.