Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 750mA

RS-stocknr.:: 194-147
Fabrikantnummer:: XCMH2121L1
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 750mA

Subtotaal (1 eenheid)*

€ 46,30

(excl. BTW)

€ 56,02

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 27 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 46,30

*prijsindicatie

RS-stocknr.:: 194-147
Fabrikantnummer:: XCMH2121L1
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	IP Rating	IP66, IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	750mA
	Series	XCMH
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Depth	79mm
	Length	16mm
	Standards/Approvals	CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Width	30mm
	Hazardous Area Certification	No
	Operating Force	12.5N
	Mechanical Life	5000000Cycles

	Alles selecteren
	Merk Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Plunger
	IP Rating IP66, IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 750mA
	Series XCMH
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Depth 79mm
	Length 16mm
	Standards/Approvals CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Width 30mm
	Hazardous Area Certification No
	Operating Force 12.5N
	Mechanical Life 5000000Cycles

Land van herkomst:: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 5000000 Cycles Mechanical Life - XCMH2121L1

This limit switch is a compact industrial sensor designed to detect mechanical movement and provide rapid electrical switching in automated systems. It uses a roller plunger actuator for direct contact detection and is built with a polymer enclosure suited to demanding industrial environments. The unit connects via an attached cable and offers snap-action contact behaviour for immediate state changes.

Features and Benefits:

• Rated for 250V DC switching to suit high-voltage DC circuits
• Supports 240V AC operation for common AC control systems
• Single changeover contact for versatile control logic
• Snap-action contacts minimise bounce for accurate signalling
• Operating force of 12.5N enables consistent actuation response
• Endurance of 5,000,000 cycles reduces replacement frequency

Applications

• Used with conveyor edge detection in manufacturing lines
• Suitable for actuator position sensing in automation
• Ideal for door-travel monitoring in industrial enclosures
• Can be used for limit detection on packaging machinery
• Used for end-of-travel control on linear slides

What environmental protection does it provide for outdoor use?

The enclosure meets IP66 and IP67 ratings, offering protection against powerful water jets and temporary immersion.

How does the contact arrangement support control circuits?

It provides one normally open and one normally closed contact to enable both make-before-break and fail-safe wiring schemes.

What terminal style is supplied for installation?

A factory-fitted cable termination is provided to simplify wiring without separate terminal blocks.

What temperature range can the device operate within?

The unit functions reliably between -25°C and 70°C for varied ambient conditions.