Philips Lighting Infrared Motion Sensor Detector, Movement, Ceiling Mount, 230 → 240 V ac, 80mm Diameter
- RS-stocknr.:
- 778-1624
- Fabrikantnummer:
- LRM1010
- Fabrikant:
- Philips Lighting
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 778-1624
- Fabrikantnummer:
- LRM1010
- Fabrikant:
- Philips Lighting
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Philips Lighting | |
| Controller Type | Detector | |
| Sensor Type | Movement | |
| Voltage Rating | 230 → 240 V ac | |
| Mount Type | Ceiling | |
| Range | 3 m, 7 m | |
| Diameter | 80mm | |
| Time Delay | 10 s → 5 min | |
| Height | 60mm | |
| Alles selecteren | ||
|---|---|---|
Merk Philips Lighting | ||
Controller Type Detector | ||
Sensor Type Movement | ||
Voltage Rating 230 → 240 V ac | ||
Mount Type Ceiling | ||
Range 3 m, 7 m | ||
Diameter 80mm | ||
Time Delay 10 s → 5 min | ||
Height 60mm | ||
- Land van herkomst:
- NL
OccuSwitch Movement Detector Recessed Mount
The Philips LRM1010 OccuSwitch is a small occupancy sensor with a detection range of 20 to 25 square meters. This movement detector can switch up to 600VA of fluorescent light simply by detecting human motion, without the need for a manual switch. The LRM1010 will shut the lights down automatically if not activated for a prolonged time, creating an energy efficient lighting system. This occupancy sensor can work with up to 10 units in parallel, with a separate low voltage bus signal, creating a large detection area.
Increased energy savings
No need for manual intervention
Automated lighting only when it is needed
Simple fitting design for any office or home
No need for manual intervention
Automated lighting only when it is needed
Simple fitting design for any office or home
Philips Occuswitch Lighting Control System
