ELT, 10 → 72V Output, 25W Output, 350mA Output, Constant Current
- RS-stocknr.:
- 796-1943
- Fabrikantnummer:
- LC125/350-A
- Fabrikant:
- ELT
Afbeelding representeert productcategorie
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 796-1943
- Fabrikantnummer:
- LC125/350-A
- Fabrikant:
- ELT
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ELT | |
| Output Voltage | 10 → 72V | |
| Maximum Output Power | 25W | |
| Output Current | 350mA | |
| Input Voltage | 99 → 264 V | |
| Operation | Constant Current | |
| AC or DC Input Voltage | ac | |
| Voltage Rating | 99 → 264V | |
| Standards Met | EN-55015-3-2, EN-61000-3-2, EN-61000-3-3, EN-61347-2-13, EN-61547, EN-62384 | |
| Alles selecteren | ||
|---|---|---|
Merk ELT | ||
Output Voltage 10 → 72V | ||
Maximum Output Power 25W | ||
Output Current 350mA | ||
Input Voltage 99 → 264 V | ||
Operation Constant Current | ||
AC or DC Input Voltage ac | ||
Voltage Rating 99 → 264V | ||
Standards Met EN-55015-3-2, EN-61000-3-2, EN-61000-3-3, EN-61347-2-13, EN-61547, EN-62384 | ||
- Land van herkomst:
- ES
ELT LED Drivers LC116 and LC125 Series
The LC 116 and LC 125 series by ELT is a range of constant current drivers for LED modules up to 16W and 25W.
Indoor use
Equipped with terminal cover and cable clamps
Clamping screws on primary and secondary circuits for cables with diameter: 3mm to 8mm
Maximum terminal section area 1.5 square mm. (secondary circuit)
Maximum length of secondary cables 5m
Suitable for installation on wooden surfaces
Standby ecological mode ˂0.4 W
High power factor
Thermal protection
Overload protection
Protection against no load operation
LED module dynamic protection
Equipped with terminal cover and cable clamps
Clamping screws on primary and secondary circuits for cables with diameter: 3mm to 8mm
Maximum terminal section area 1.5 square mm. (secondary circuit)
Maximum length of secondary cables 5m
Suitable for installation on wooden surfaces
Standby ecological mode ˂0.4 W
High power factor
Thermal protection
Overload protection
Protection against no load operation
LED module dynamic protection
Approvals
EN 61347-2-13
EN 62384
EN 61000-3-2
EN 61000-3-3
EN 55015
EN 61547
EN 62384
EN 61000-3-2
EN 61000-3-3
EN 55015
EN 61547
ELT LED Drivers / Power Supplies
Gerelateerde Links
- MEAN WELL LED Driver, 42 → 72V Output, 25W Output, 350mA Output, Constant Current
- ELT, 12 → 46V Output, 16W Output, 350mA Output, Constant Current
- ELT LED Driver, 9 → 31V Output, 10W Output, 350mA Output, Constant Current
- MEAN WELL LED Driver, 84V Output, 25W Output, 350mA Output, Constant Current Dimmable
- Recom LED Driver, 3 → 15V dc Output, 3W Output, 350mA Output, Constant Current / Constant Voltage
- Recom LED Driver, 10 → 20V dc Output, 7W Output, 350mA Output, Constant Current / Constant Voltage
- Recom LED Driver, 3 → 24V dc Output, 6W Output, 350mA Output, Constant Current / Constant Voltage
- Recom, 6 → 56V Output, 20W Output, 350mA Output, Constant Current
