NXP LED Driver, 1.6V Output, 10mA
- RS-stocknr.:
- 219-4628
- Fabrikantnummer:
- PCA9685PW,118
- Fabrikant:
- NXP
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 verpakking van 5 eenheden)*
€ 20,42
(excl. BTW)
€ 24,71
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 20 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 2.415 stuk(s) vanaf 03 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 - 45 | € 4,084 | € 20,42 |
| 50 - 95 | € 3,49 | € 17,45 |
| 100 - 245 | € 2,774 | € 13,87 |
| 250 - 995 | € 2,716 | € 13,58 |
| 1000 + | € 2,666 | € 13,33 |
*prijsindicatie
- RS-stocknr.:
- 219-4628
- Fabrikantnummer:
- PCA9685PW,118
- Fabrikant:
- NXP
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | NXP | |
| Output Voltage | 1.6V | |
| Product Type | Display Controller | |
| Input Voltage | 2.3, 5.5V | |
| Mount Type | Surface | |
| Sub Type | LED Driver | |
| Terminal Type | Solder | |
| Driver Current | 10mA | |
| Series | PCA9685 | |
| Standards/Approvals | RoHS | |
| Power Dissipation | 400mW | |
| Alles selecteren | ||
|---|---|---|
Merk NXP | ||
Output Voltage 1.6V | ||
Product Type Display Controller | ||
Input Voltage 2.3, 5.5V | ||
Mount Type Surface | ||
Sub Type LED Driver | ||
Terminal Type Solder | ||
Driver Current 10mA | ||
Series PCA9685 | ||
Standards/Approvals RoHS | ||
Power Dissipation 400mW | ||
The NXP PCA9685 is an I2C bus controlled 16 channel LED controller optimized for red or green or blue or amber (RGBA) colour backlighting applications. Each LED output has its own 12 bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a typical of 24 Hz to 1526 Hz with a duty cycle that is adjustable from 0 % to 100 % to allow the LED to be set to a specific brightness value. All outputs are set to the same PWM frequency.
No output glitches on power-up
Supports hot insertion
Low standby current
Gerelateerde Links
- NXP LED Driver, 1.6V Output, 10mA
- NXP PCA9622DR,118 LED Driver IC, 2.3V, 5.5 V 100 mA 32-Pin TSSOP
- NXP PCA9635PW,112 LED Driver IC TSSOP
- NXP LED Driver, 25mA 256 Brightness Steps
- Intelligent LED Solutions LED Driver, 24V Output
- PowerLED LED Driver, 12V Output, 200 W Output
- RS PRO LED Driver & Controller, 100W Output, 10A Output
- MikroElektronika PWM Click PWM Controller for PCA9685PW for Robots, Servo Motors, LED Drivers
