Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Nexperia
	Logic Family	HCT
	Latch Mode	Transparent
	Latching Element	D Type
	Number of Bits	8bit
	Output Type	3 State
	Polarity	Non-Inverting
	Mounting Type	Surface Mount
	Package Type	SOIC
	Pin Count	20
	Dimensions	13 x 7.6 x 2.45mm
	Height	2.45mm
	Length	13mm
	Maximum Operating Temperature	+125 °C
	Minimum Operating Supply Voltage	4.5 V
	Width	7.6mm
	Maximum Operating Supply Voltage	5.5 V
	Minimum Operating Temperature	-40 °C

	Alles selecteren
	Merk Nexperia
	Logic Family HCT
	Latch Mode Transparent
	Latching Element D Type
	Number of Bits 8bit
	Output Type 3 State
	Polarity Non-Inverting
	Mounting Type Surface Mount
	Package Type SOIC
	Pin Count 20
	Dimensions 13 x 7.6 x 2.45mm
	Height 2.45mm
	Length 13mm
	Maximum Operating Temperature +125 °C
	Minimum Operating Supply Voltage 4.5 V
	Width 7.6mm
	Maximum Operating Supply Voltage 5.5 V
	Minimum Operating Temperature -40 °C

The 74HC573, 74HCT573 is an 8-bit D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state.

Mixed 5 V and 3.3 V applications
Save board space
Low cost interface solutions
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Overvoltage tolerant
Source termination
Low input threshold
CMOS low power
Key applications
Memory controllers
Backplane interfaces

74HCT Family

Nexperia 74HCT573D,652 8bit-Bit Latch, Transparent D Type, 3 State, 20-Pin SOIC

Gerelateerde Links