Nexperia 74HC373D,653 8-Bit D Type Latch, Transparent, 3 State, 20-Pin SO
- RS-stocknr.:
- 170-8000
- Fabrikantnummer:
- 74HC373D,653
- Fabrikant:
- Nexperia
Subtotaal (1 rol van 2000 eenheden)*
€ 500,00
(excl. BTW)
€ 600,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 2.000 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 4.000 stuk(s) vanaf 06 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2000 + | € 0,25 | € 500,00 |
*prijsindicatie
- RS-stocknr.:
- 170-8000
- Fabrikantnummer:
- 74HC373D,653
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Logic Family | 74HC | |
| Product Type | D Type Latch | |
| Logic Function | D Type | |
| Latch Mode | Transparent | |
| Number of Bits | 8 | |
| Number of Channels | 8 | |
| Output Type | 3 State | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SO | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 13mm | |
| Series | 74HC | |
| Standards/Approvals | No | |
| Height | 2.45mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Logic Family 74HC | ||
Product Type D Type Latch | ||
Logic Function D Type | ||
Latch Mode Transparent | ||
Number of Bits 8 | ||
Number of Channels 8 | ||
Output Type 3 State | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SO | ||
Pin Count 20 | ||
Maximum Supply Voltage 6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 13mm | ||
Series 74HC | ||
Standards/Approvals No | ||
Height 2.45mm | ||
Automotive Standard No | ||
The 74HC373, 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE.
Mixed 5 V and 3.3 V applications
Save board space
Low cost interface solutions
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Overvoltage tolerant
Source termination
Low input threshold
CMOS low power
Key applications
Memory controllers
Backplane interfaces
Gerelateerde Links
- Nexperia 74HCT573D,653 8-Bit D Type Latch, Transparent, 3 State, 20-Pin SO
- Nexperia 74HC573D,653 8-Bit Octal D Type Latch, Transparent, 3 State, 20-Pin SO
- Nexperia 8-Bit Octal D Type Latch, Transparent, 3 State, 20-Pin SO
- Nexperia 74HC259D,653 8-Bit 8 Bit Latch, Addressable, CMOS, 16-Pin SO
- Nexperia 74HC273D,653 8-Bit Latch, Addressable, D Type Flip-Flop, 20-Pin SO
- Nexperia 8-Bit 8 Bit Latch, Addressable, CMOS, 16-Pin SO
- Nexperia 8-Bit Latch, Transparent, 3 State, 20-Pin SOIC
- Nexperia 74HCT573PW,112 8-Bit Latch, Transparent, 3 State, 20-Pin TSSOP